28 replies
by yapanitz Accepted solution
by seanferd Accepted solution
Which version of Windows is this? Do you have an OEM or retail Windows CD, or is there a recovery partition?
If you don't have any of these, and no way to get to the Recovery Console, I suggest downloading and burning the UBCD or a Linux Live CD like Knoppix so you can fix possible errors without having to do a reinstall.
If you do, you can always try a non-destructive Repair Install first.
Currently, you can press F8 to get more options at the boot choice screen. Enable boot logging. You can also try disabling reboot on failure.
by santeewelding Accepted solution
For my part -- which is not (his) part -- I would have dumpstered the damned thing and bought anew, entering it as a writeoff, considering, businesswise, how much I charge for paying attention, worse for lifting a finger.
Yours is the more better way to go.
by boxfiddler Hot topic Accepted solution
by boxfiddler Hot topic Accepted solution
you've two repair options on it when you boot from it. One via the Recovery Console which is offered first. I've not used it, I won't speak to it.
The second option comes via the Install sequence. You have to sit through driver load to get to it, as well as read the screens carefully. I've had great luck with this option.
You'll need to set your BIOS to boot from CD.
This applies, at least, to Win2K and WinXP. I can't see why it wouldn't apply to Vista and/or Win7 - oh wait, Uncle Billy's in town.
It strikes me your master boot record is out of whack.
etu
by yapanitz Accepted solution
by oh smeg Accepted solution
As apposed to a System Makers Recovery Disc most times but you boot off the Install Disc and follow the prompts to install Windows.
You are given an Option to Repair Windows early on which takes you to the Repair Consul and I've never had much joy with that so you press the other option. The next time you are prompted to press the [b]R Key[/b] you press it and do a Repair Install.
[b]But[/b] you should have a full backup before starting this process. If you don't you run the risk of loosing your if something is to go wrong during the Repair Install.
Full Details are available here
http://support.microsoft.com/kb/978788
Follow the directions listed under the [b]Method 2 Heading.[/b]
Col
by oh smeg Accepted solution
I'm not sure about Vista as I haven't used it that much but by using the [b]F6 Key[/b] on 7 you are taken to a Prompt to repair Windows instead of the Boot Options Menu.
So 7 and possibly Vista are different in this regard to XP and earlier versions of Windows. ;)
Col
by santeewelding Accepted solution
by santeewelding Accepted solution
To tell you, and everyone else, about Bobcats (~$20,000 a pop), and the backyard swimming-pool industry in Southern California.
Those things were eventually discarded, rather than repaired, the way that I discarded paper clips, there was so much money being made.
by oh smeg Accepted solution
Sorry I don't know anyone who deals in equipment that small. :p
No profit in dealing with the small end of the market.
Col
by seanferd Accepted solution
by santeewelding Accepted solution
With those things; backhoes, too.
I had been -- not so much, now, due to the "climate" -- inured to their structural evolution (as well as Col mentions, with the larger pieces, four-inch thick members, and all, snapped in two) for all of about 30 years.
Tell Col, if you remember, about standing inside a clamshell, and making it right.
by yapanitz Accepted solution
by boxfiddler Hot topic Accepted solution
Has it been making any noise? Usually, though I'd guess not always, they make odd noises before they go. I'm running on an eight and a six year old hard drive, so that may or may not be the problem.
Check the link that Oh Smeg provided in response to your request for more detail.
Also, check your internal drive connections. Maybe you've a loose drive cable, or even a bad cable. If so, they're easy enough to replace.
by seanferd Accepted solution
First, go to the HDD vendor's site and download their tool for testing drives. Run this to see if the drive is failing or has bad sectors.
If the drive is OK, get DBAN or Killdisk and use this to wipe the drive before re-installing XP. (Back up all your data first!)
by yapanitz Accepted solution
by oh smeg Accepted solution
Are you leaving the system alone when it reboots?
If when it comes to the the Press Any Key to Boot From CD screen you press any key you are restarting the Install Process. You should leave it alone and it will then proceed to the next part of the Install Process.
Col
by yapanitz Accepted solution
by seanferd Accepted solution
by yapanitz Accepted solution
by santeewelding Accepted solution
And, to reveal, is my own habit of screwups.
I thought the same, Col, having done exactly the same, before I caught on to my error.
Further, as he testifies, it was [i]supposedly[/i] bad RAM; new, supplied by a friend.
Do you suppose the friend was also involved in the (new) install process, and knew better?
by oh smeg Accepted solution
If you did no matter that they both Test OK there could be timing Issues that are causing problems between the 2 Different Modules.
It's part of the reason why Memory Makers tell you to use Identical RAM in different Memory Slots.
Col
by 4itpro Accepted solution
by yapanitz Accepted solution
by seanferd Accepted solution
If it is working now, I imagine the RAM needed to be re-seated, or that the contacts needed to be cleaned - they may have been cleaned enough simply by pulling and re-seating it.
If it is not working, refer to the previous comment about mixing RAM modules.
by yapanitz Accepted solution
by seanferd Accepted solution
We don't know anything at all about your computer.
Check the documentation at the vendor's site for the RAM specifications for your exact model (better: serial number) of system board.
You can also use this:
http://www.crucial.com/systemscanner/
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending