Discussion Locked

What Resources???

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have been given the task of building a new MS proxy 2.0 server for a new .com

The anticipated hit rate expected for the proxy server is in the mid hundreds per hour.

I am unable to find any real info, except the MS suggested, on what the hardware config should be used to support this amount of through put.

Having no experience with Proxy and what hardware it will require, I was wondering if anybody is able to make a real life suggestion?

Thanks
Shane

5 replies

by penguin2k

Hello Shane,

Is it necessary that you are going to use MS PROXY? How bout using Linux Server for that. Try to read some info about Linux Masquerade or IPCHAINS. In our Company we use Linux as a Gateway and we're connected to the internet by CABLE. I guess this give you some idea.

More Power..

by paull

Thanks for the thought. I had had the same idea, however the Technical Director is a MS man through and through and Linux won't even get in the front door of the building!

by jmorris

I'm running MS Proxy 2.0 on a Pentium Pro 200 with 256MB RAM and a 9.1 gig HD. With about 250 users internally using it to access the internet. I've been trying to push through a more beefy server but to no avail. I would reccomend something with a PIII 500 or better with 512MB RAM. That would give you plenty of room to grow in the future. Make sure you get a server class NIC for this as well, they take some of the processing load away from the CPU.

This discussion is closed to new replies.