When I used IBM PCs and Apple II clones, I didn't touch the inside.
Then I bought a Mac SE with no HD and two floppy slots.
http://en.wikipedia.org/wiki/Macintosh_SE
But I soon found I wanted to stop swapping floppies (OS fit on one, app on another) and have a HD. I'd seen the inside of a PC but never swapped a drive.
At the time you were strongly encouraged to have an apple dealer do the upgrades. But I was reading a MacWorld and learned hwo to do it. First you needed a foot long Torx screwdriver, because there were two screws recessed under the "handle" of the Mac (indentation behind the monitor). But you also needed a case cracking tool - once you took the screws out friction held the back of the case on and you needed to pry it off. It was kind of a reverse clamp. Well they wanted $50 to buy a kit, but I found a clamp in the hardware store and I had SnapOn tools make me a screwdriver custom for about $25.
Getting into the SE was hard, adding the HD was pretty easy. It was a non Apple SCSI drive, so I had to use a third party tool to format it.
It worked out so well, I did it for a friend who paid me with a nice bottle of wine.
My next big thing was when I had a Mac II, more like a PC in layout. It was getting kind old and slow and I couldn't afford a new one. It was not designed to have the CPU be upgraded - it was set into the motherboard by a large number of pins.
I found a third party upgrade that would upgrade the speed from 16 to 25 Mhz. It sat on a small daughterboard that would fit over the processor slot. I had to use a flat screwdriver to pry the old processor out (68020). In prying it out I bent some pins, so I knew there was no going back.
It did go in and it did seem to improve the speed.
And Jeff I remember when RAM was $400 a MB, and I went from 256 K (yes thats right) to 1MB on a Mac. I also remember putting $30,000 worth of RAM into a Sun server cause all the tech in the office were HP trained and wouldn't touch the Sun server. I knew the Sun server used the same type of RAM as the Mac, and I was confident in that, so I went ahead and did it. I did breath a sigh of relief afterwards though.
James