Waaaaaaaaay back in college (1972), our college ran an IBM 360/48. (In those days, that was a mid-range machine worth about 1/4 million. With 48K (miniscule by today's stanmdards) of core memory, the CPU alone measured 6' x 3' x 8'.)
Late one night while, when all our batch processing was finished, I was experimenting IPL-ing (booting) the machine from different devices (card reader, tape drive). I was intrigued how the machine would respond when I tried to IPL from a disk that was not powered up.
I hit the IPL button. Within seconds, the machine shut down. All lights on the operator's panel were out except for one incredibly bright red Thermal Check light.
I opened up the access doors and found a reset switch. I hit it and the light went out. I then hit the main power button. So far, so good.
THIS time, I powered up all the disk drives and hit the IPL button. (No more screwing around - I was sweating bullets.) I crossed my fingers and hit the IPL button. Again, the power flipped back off and the Thermal Check light was the only light glowing were there chould have been about 100 happy lights blinking furiously away.
Gulp! I thought that was the end of my college career.
IBM was called and a crucial 8K unit of very expensive core memory had to be replaced. Instead of a nice array of neatly arranged ferrite cores, the Customer Engineer found a puddle of melted ferrite and tangle of burnt wires.
8K or core memory cost $24,000 --- 1972 dollars! (That has to be equivalent to something like $100,000 nowadays.)
IBM replaced the memory under warranty. (Let's face it, it shouldn't have happened. But then again, what kind of idiot deliberately IPLs that a machine that way?)
I was lucky. Had I not been doing a valid project on Operating Systems design, I might have ended up as a plumber*.
* Making $80,000 a year with steady employment! Maybe I should have been thrown out!!