Discussion Locked

Where are Netware log files at??

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
This may be easy....but my Netware system keeps rebooting itself for no reason. What makes this bad is our phone switch works through the Netware server. We have Callegra. Either way, I would like to know some files that I can see on the server to find out why the server all of a sudden just quit and restarted. Please point me to the right log files. Thanks.

13 replies

by gnet158

There are a couple of log files you need to take a look at. In Netadmin you would go to the server object and right click, select details and click on error logs. If you wanted to print the error logs at the root of your SYS volume search for *.log. Open them with notepad

by lexorabenz

Checked those, but they didn't really help....didn't show much info about what failed before it stopped. Thanks for the info though.

by jaolson40

Check for ABEND.LOG. I believe it may be in SYS\ETC, or in SYS\SYSTEM. That may contain the last abend before the reboot, if it had time to write to the log before it went down.

by lexorabenz

Checked the file, but it didn't have time to write to the log before it went down. Thanks for the suggestion though.

by tbradley

Been there, done that, and I don't think it's a software problem. Look at your building power.

Is your server on an ups?
Is your building power clean?
Is there any heavy draw items on the same circuit, ie airconditioners, fans, or other infrequently operating items?

I pulled hair for 3 months before I found a server that rebooted itself several times a day was on the opposite side of the wall from a simple electric pencil sharpener. After numberous pledges from the electricians thatthe server was on an isolated circuit, after plugging the server into another outlet, the problem never came back.

by lexorabenz

Our power is good and everything is working ok here, but thanks for the suggestion....that can always be a problem.

by acurrin

load conlog.nlm at the server console and it will track everything written to the server screen to a file called console.log in the sys:etc folder.

The old file is deleted after each loading of conlog.nlm, so if you have reloaded the NLM automatically in the autoexec.ncf, use salvage/filer to recover the original file to a new file name and then view it in WordPad or other text editor.

by mal4462

If you have CONLOG.NLM loaded and running at all times, the console messages will be logged to SYS:ETC\CONSOLE.LOG

by trzuskotm

If you have a netware 5.x. In console monitor you have setting in Error Handling Parameters which is called 'Auto Restart After Abend' just make sure is set to 0. Then the server will try not to recover from abend giving you all the necessary information.

This discussion is closed to new replies.