Discussion Locked

Who can help with Border Manager?

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can Someone describe how to set up packet forwarding filters for SMTP on Border Manager 3.5? I need to get the packets to forward to a GWIA gateway on a server seperate from the Border manager server.

11 replies

by traveller2k1

That install guide looks nice, but I'm afraid I never studied German. I looked but I didn't see an english section. Did I just miss it?

by maxwell edison

Greetings (or should I say "Begr??ungen"),

That was pretty interesting. I don't read German either.

It appears that there was an erroneous space after the "G" and before the "uide" in the posted URL. I suppost it's a coincidence that it actually want to a site - a German one at that!

I'll paste it here again, trying to eliminate that pesky space. It's interesting how those spaces appear when cutting and pasting web addresses.

Cut and paste it again - REMOVING ANY SPACES.

I pastedit, removed that space - and it really works.

http://www.technik-news.de/novell/download/InstallationGuide.pdf
Dusel, mein Freund,

Max

by traveller2k1

I've tried the URL with and Without spaces... The manual has some english to it, but is written primarily in German.

by traveller2k1

Tried the PDF before you mentioned it, and wound up not getting to the point of the support forum. But thank you very much, just the same.

by sanjeevk

Setting Up an SMTP Filter
You can set up a SMTP exception on the server's public interface to allow SMTP mail servers or SMTP gateways in your private network to send and receive mail through the BorderManager firewall.

l Setting Up a Stateful SMTP Filter
2 Setting Up Static Filters for SMTP

Setting Up a Stateful SMTP Filter
To set up a stateful SMTP filter exception, complete the following steps from the main FILTCFG menu:
1. Select Configure TCP/IP Filters > Packet Forwarding Filters > Exceptions.
2. Press Ins to define a new exception.
3. Specify the Source Interface by doing one of the following:

3a. If you want private SMTP servers or gateways to be able to send mail through the firewall, specify the server's private interface.
3b. If you want public SMTP servers to be able to send mail to the SMTP server in your private network, and you have not enabled the Mail proxy, specify the server's public interface.
4. Specify the Destination Interface by doing one of the following:

4a. If you want private SMTP servers or gateways to be able to send mail through the firewall, specify the server's public interface.
4b. If you want public SMTP servers to be able to send mail to the SMTP server in your private network, and you have not enabled the Mail proxy, specify the server's private interface.
5. Press Enter for Packet Type and select smtp-st.
6. Press Esc and select Yes to save the filter.

IMP: The outbound stateful SMTP filter does not allow domainnames to be resolved by a DNS server on the public network. Refer to Setting Up a DNS Filter.

Setting Up Static Filters for SMTP
If you do not want to configure a stateful SMTP exception, you can create static filters instead. Simply create a static SMTP filter exception in both the inbound and outbound directions. Make sure you enable ACK bit filtering for the exception in the inbound direction.

by traveller2k1

My now somewhat expanded knowledge lets me say- the above is correct. It turns out I was having a different problem but this is definitely a good size portion of what was wrong.

This discussion is closed to new replies.