I believe MehulBhai was right about limited number of DHCP users.
But we need to find out what box is doing what.
The DHCP server in the Linksys router would in standard configuration happily distribute at least 50 addresses.
Either the DHCP of Linksys has been reconfigured, or Linksys has been put in "bridge mode" effectively converting it into a mere access point, working under supervision of some other box (most probably the Telenet modem, but I'm also wondering what those Motorola boxes are doing.)
Let's try to figure out, which box is your router.
Open a command window and issue the command ipconfig /all
You should get a list of several interfaces.
Look closer at the section about wireless. Note the address of the "default gateway".
Next, enter the address of the default gateway into a browser, just to see if you get any hint, whether you're talking to Linksys, Motorola, Telenet or something else.
When it asks about a password, just hit escape or enter blank.
On WRT54G, the default user is blank and default password is "admin".
Well, that's a good first step. Let's see what you get.
Oh, can you find any model numbers on the modem and the Motorola boxes? Are all boxes connected via ethernet cables?