Question Locked

Why doesn't Windows 2003 R2 Standard Edition like Vista?

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We had a Blade Server installed with Windows 2003 Server R2 SP2 Standard Edition. We were told that Vista is not compatible with this server. I haven't gotten an answer to why, especially since we'll have the server for a few years and XP is being fazed out in a few months. I hooked a Vista machine up on the network and it was unusable with the server. Folders on the server took several mintues to open on the Vista machine and server applications would not run at all.

6 replies

by cg it

and Windows Server 2003 RC 2 SP2 both in a workgroup and domain environment. There is an issue with the Windows SBS client connection during logon but all that does is create an annoying popup box. Doesn't effect logon or use of server resources.

I like Vista business. Where I've seen problems is where Administrators created scripts or programs to run for W2K/XP and those aren't compatible with Vista. Some logon scripts and admin scripts have a difficult time running with UAC.

by jneilson

I don't like Vista either, but I didn't order this perticular computer. I do worry about the future since I'll have to buy more computers in the next couple of years and XP is being fazed out. My boss paid big bucks, by our standards, for the server and it will hang around for years.

by davidt5

My experience is that Vista works seamlessly when the Vista patch is applied. It came out quite awhile ago....

by Former member

You can download the update from the following link:

Link Layer Topology Discovery (LLTD) Responder (KB922120)

All this is good and well, however there's one little catch. By default, you can?t run the LLTD responder update under Windows 2003.

However, you can try to force the update to run by performing these steps:

Note: Installing LLTD on Windows Server 2003 is NOT SUPPORTED by Microsoft, and has mixed results. Do NOT do it if you don't know what you're doing, and if something breaks, don't expect anyone to help you.

1. After downloading the update, navigate to the folder where you've saved the file and right-click it. Select Properties.

2. Next, in the Compatibility tab, click to select the Run This Program in Compatibility Mode for, and in the drop-down list select Windows XP. Click Ok.

3. You can now install the update. You will not be prompted for a reboot, but you might want to reboot anyway.

4. Next, you need to install the LLTD protocol in the network adapter's properties. Go to the downloaded file from step 1, and double-click on it as if to install it. Do NOT proceed with the installation, just leave the welcome screen open. Now go to your hard disk, and on the partition with the largest available free space you'll find a folder which's name is made of many letters and numbers (name varies, so there's no point in typing it here).

5. Open the network interface's properties screen, and click install.

6. In the network component type click Protocol and the click on the Add button.

7. In the Select Protocol window click Have Disk, and browse to the folder from step 4. In that path, look for the file called rspndr.inf. Click Ok.

8. In the Select Network Protocol window click the Link-Layer Topology Discovery Responder and click Ok. After a short installation, the new protocol should be available in the network interface's properties screen.

9. To be safe, reboot the computer. It should now be visible on the network map.

As noted above, this procedure is not supported in any way. Use at your own risk. :)
I did this to my server and it works well, but then you might have a different set up.

Please post back if you have any more problems or questions.
If this information is useful, please mark as helpful. Thanks.

This discussion is closed to new replies.