5 replies
by dollahid Accepted solution
by robo_dev Accepted solution
Sometimes the motherboard gets shorted to the case. Be sure you use the correct plastic stand-offs. Sometimes you need to add a piece of electrical tape onto the mobo if the case has something metal sticking up.
First thing to try is to take mobo out of case, remove memory and all cards, unplug all drives. Connect power supply and short power switch pins on mobo.
by dollahid Accepted solution
by robo_dev Accepted solution
sometimes it's OK to ground parts of the MOBO to the case, but for some parts it's not OK.
I bet you $5 if you take the mobo out of the case it boots right up.
by oh smeg Accepted solution
If it did make sure to correctly fit it to the case and most importantly make sure that the Mounting Hardware is actually under Holes in the M'Board.
Col
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending