11 replies
by williamm77 Accepted solution
by charles bundy Accepted solution
by oh smeg Accepted solution
You'll need to list the Hardware that you have here.
So what M'Board are you running and which SATA Connectors are the SATA HDD and Optical Drive plugged into?
Some M'Boards have several SATA Connectors but do not support a Individual SATA Device on each Connector as they where designed to support RAID Array HDD on some connectors only not stand alone drives.
Col
by williamm77 Accepted solution
by thechas Accepted solution
We need the specific model number of your motherboard. Asus has made 100's of different motherboards and the advice needs to be for the specific model you have.
This may also be an OEM board manufactured by Asus. If there is a brand and model for your computer, please provide that.
Chas
by williamm77 Accepted solution
by thechas Accepted solution
You may also need to download and install a newer or the latest version of the Chip-Set drivers for your motherboard or SATA controller.
The driver for the chip-set or SATA controller provides the driver for all of your drives. If it is out of date and does not fully recognize your drives, the drive will not work.
Chas
by williamm77 Accepted solution
by charles bundy Accepted solution
I'm a little unclear on which is the problem. Does the DVD/CD icon show up under WinXP - My Computer? or is it the lockup that is the problem?
You indicate that "all the icons lock up" when you put a disk in. That sounds like a bad optical media read-retry thrashing, not a hardware problem, assuming that the DVD/CD icon is there in the OS as well as the BIOS.
What ASUS motherboard are you using? OH Smeg is spot-on regarding certain SATA ports being attached to different SATA controller chipsets. Usually they are color coded. If so move your DVD cable to a SATA port of the same color as the HD.
by williamm77 Accepted solution
by tigerbright888 Accepted solution
My guess is that you replaced the optical drive without first uninstalling
the previous drive and so Windows is still configured for the previous
drive, hence the i/o issue
Not normally a problem but some dvd models have low compatibility with other
drive configurations when installed without taken this factor into account.
I would suggest uninstall the dvd device via device manager , shut down the
computer and physically uninstall(disconnect) the dvd drive, then restart
twice to configure as per the new chipset specs (the second time to create a
new last known good Windows)
Then shutdown and then reinstall the drive unit and boot up to positively
install and configure for the new dvd drive
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending