Question Locked

Wi-fi networks

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Until now, I've used an Ethernet cable between my router and desktop. Yesterday, I suddenly had no Internet. I tried 2 other cables, to no avail.
After clicking on Run Diagnostics, it informed me that I had no Internet access (duh!) but that wi-fi was available. It showed me 3 available networks, my own, BeFiber and Hidden Network. Those last 2 show intermittently in the list of available networks. I have no idea what they are.
Could Windows be showing me other people's nearby wi-fi networks? If not, how do I go about determining what they are?

6 replies

by Wizard57M-TR edited

as will Linux, MacOS, Android, IOS, etc...but you still have to know the password if it is protected.
It's sometimes considered insecure to use open networks, unless you know the owner.

by doniel edited

This was probably the easiest question and answer posted by me (the question, that is).
As far as I'm concerned, this thread is finished.
Thank you again, Wizard57M-TR!

by cartdaniel437 edited

Yes, Windows can show Wi-Fi networks from nearby routers, not just your own. The networks labeled “BeFiber” and “Hidden Network” are likely your neighbors’ Wi-Fi or public hotspots.

To investigate further:

Check the SSID (network name) and see if it matches any of your devices.

Use a tool like Wi-Fi Analyzer (Windows Store) to see signal strength and approximate location.

“Hidden Network” simply means the router isn’t broadcasting its name. You won’t be able to connect unless you know the password.

Your Windows diagnostic is correct—your Ethernet is down, but Wi-Fi networks nearby are still visible.

by doniel

I appreciate the additional info, cartdaniel437.
Interestingly, Connect Automatically was checked for Hidden Network, I figure that means I don't need to know the password. Or am I figuring wrong? It's a moot point, since I have no reason to piggyback onto someone else's wi-fi.
At some point, I stumbled across Enable Ethernet somewhere in Settings. Since I've been connected via Ethernet all along, I'm at a loss to understand how it got disabled.

by vododugirol641 edited

Yes, totally normal — Windows detects all nearby Wi-Fi signals, even if they belong to your neighbors or are set up as “hidden” networks. Hidden networks don’t broadcast their SSID (name), but your device still sees their signal strength.

by gracemiller8477 edited

Yes, Windows is showing nearby Wi-Fi networks, which can include your neighbors’ routers or public hotspots, so seeing unfamiliar names like “BeFiber” or “Hidden Network” is normal. The “Hidden Network” simply means the SSID isn’t broadcast, not that it’s malicious. To identify them, you can use a Wi-Fi analyzer tool to see signal strength and approximate location, or check your router’s connected devices to ensure no unauthorized access. Meanwhile, focus on reconnecting your PC via Wi-Fi or troubleshooting the Ethernet issue—often caused by a faulty port, adapter, or driver rather than nearby networks.

This discussion is closed to new replies.