Discussion Locked

Will not print from Certain Queues

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm running Novell 4.10; we have a strange issue. A couple of the queues that are serviced by our print server will not process the jobs unless you unload and reload the pserver. This only happens to 2 queues, all the others being services by the pserver will spool the jobs to the printers fine. We deleted and recreate the queues that we are having a problem with, but the problem still persists. If you have any suggestions, please help. Thank You, Mike Scott

12 replies

by pierrejamme

There is pserver.nlm and then there are pserver devices, you did not state what print server devices you were using. Some of the older devices cannot use NDS only Bindery. Bindery devices are flaky in an NDS environment. (Old Castelle etc.)Replace with and Intel or HP Jetdirect should help. Also map your queues identically as \\pservercontext\queuename

by omnitech

I forgot to State that the Queues that are having the problem, are printing to Intel Netport Pro 100, and 10/100 Netports. The Netprots are setup as RPRINTERS, And also setup for TCP/IP Printing.

We have tried to reset the Netports, before stoping and starting the pserver, but that did not help.

Here is the Properties of the -
PSERVER.NLM November 19, 1996 3:45:04 PM

by pierrejamme

Granted I am not using 4.10, using 4.11 but I don't even load pserver.nlm or use rprinter (rprinter is for attaching to a Windows W/S) with my Intel Netport Pro's. Connect your Intel to a CAT 5 port and create your queues with pconsole or nwadmin95. Your Intel's will generate a printserver in Nwadmin95 that looks something like PR270FE0.context, use that as your print server and you don't even need to create printers. Go into Intel and configure as NDS and then assign queues and set TCIP settings if they aren't already assigned. Try One

by pierrejamme

Granted I am not using 4.10, using 4.11 but I don't even load pserver.nlm or use rprinter (rprinter is for attaching to a Windows W/S) with my Intel Netport Pro's. Connect your Intel to a CAT 5 port and create your queues with pconsole or nwadmin95. Your Intel's will generate a printserver in Nwadmin95 that looks something like PR270FE0.context, use that as your print server and you don't even need to create printers. Go into Intel and configure as NDS and then assign queues and set TCIP settings if they aren't already assigned. Try One

by p. dickason, cne, mcse, cca

Hi,
Have you applied the latest PSERVER.NLM which is found in PS4x03.EXE? Pierre's solution is the preferred method for setting these things up because configured as a print server, they process print jobs a lot faster than as a remote printer. Keep in mind tho that in print server mode, each printer will suck up a user license. That would become crucial if you have say 8 users, 3 printers and only a 10 user license of NW.
Hope this helps.
Pete

by wcraigmiles

If these queues have been in service for quite awhile they may be corrupted. Also, do not create bindery queues. Using pconsole is not necessarily the best way. Also, jet admin from HP can have some serious issues when dealing with NDS. So be careful with what tool you use.

Novell highly recommends that you do not use pserver with the newer remote print devices. If the printers are network printers, have the printer connect to the server and pull the job from the queue. You do not needpserver for this. I only use pserver for those printers connected directly to the server. This is not really practical for to days environment.

This discussion is closed to new replies.