Question Locked

Win 10 keeps Rebooting with Security msg

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just bought a Windows 10 desktop i7 2.8 Hz computer. Now after 3 weeks I changed the RAM to another RAM. Now every 30 minutes it keeps rebooting? I am going to change the old RAM back into the original config, see if that prevents from reboot? Otherwise what else can be the issue? Or do I need Win 10 Professional install to fix it? Does disconnecting from Wi-fi prevent viruses breaching security ? Thanks.

8 replies

by kees_b

Somehow, it seems unlikely that changing the RAM would lead to a "Security msg". So I think it's something else. Of course, undoing the change should be harmless, but I doubt if that's the fix.

There surely is no need for another version (Pro in stead of Home) of Windows 10. But - depending on the cause - it could be that a refresh or reset or clean install of Windows solves the issue.

Please tell more about:
- the computer (a Speccy would be fine, google that)
- the old RAM
- the new RAM
- the exact text of the message

by shaz343

HP
HPE 372f
i7 2.8 Ghz
8 logic processers
4 physical
AMD radeon HD 5700
RAM 8GB

I changed the original HP ram 8 GB to another set of RAM also 8GB but from a 2011 desktop PC.

by birdmantd

Just wondering, did you confirm that RAM you installed is fully compatible with the motherboard? Also could be bad/faulty RAM that you bought.

by shaz343

I was under the impression the software was bad.
In this case was going to do re-image.
But Discussing from the feedback the RAM could be the culprit.
I will change the RAM in back to original config and hope all is well.
If there is no software issue after 30 minutes of self reboot than PC is considered fixed. Its 29 min passed the PC seems to be working without rebooting since change the RAM.

by naheed mir

Hello,
Can you share what Security message are you getting?
I will suggest resetting your BIOS settings and then check
if it solves the issue. Moreover, try to reset CMOS also.

by shaz343

The ram needed replacing to original config.
Thanks.

This discussion is closed to new replies.