Discussion Locked

Win 2000&98 network blind

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I've got 2 Win98 and 1 2000 Pro installed at my home peer-to-peer network. They are connected with 3C509b -cards and all belong in the same workgroup. Protocol is TCP/IP. The two Win98 PC:s work fine together but Win 2000 can't see either of the 98's and vice versa. Neither does ping go trough. HW is tested and ok. (Worked with NT4.0Wks) I've tried newer drivers, NetBEUI, IPX/SPX, changing HW (desperate:), uninstall/install etc. Network properties indicates that everything is ok but nothing still does not work. Win 2000's own netaddress answers to ping as it should. Tell me, please, what to do next?

5 replies

by swilliam

what are the ip addresses of the 3 systems? are they static addresses or assigned via dhcp? i'd check and make sure that they are all in the same subnet and that the subnet mask is correct. it sounds like the 2 win98 systems are in the same subnet but the win2000 system is not.

hope this helps!

by goddessno1

IP:s are in same subnet, in a private network (Starting with 10.#.#.#)and the Win98 machines work OK with same settings. Only the Win2000 doesn't work. No duplicate IP's either. Do you have more ideas?

TIA

by joevano

IP traffic doesn't depend on the OS you are running. If you can ping the the 98 machines from each other but not the 2000 machine, then there is a problem with the 2000 machines hardware, IP configuration/instalation, cableing, or port on the hub. First, on the 2000 machine, from the command prompt (DOS window, and I know technically it's not DOS) type 'ipconfig' and press enter. Look at the settings for 'Ethernet adapter Local Area Network Connection' to see if the settings match what you think they should be. Next go to Device Manager and make sure that your network card is operating properly (no yellow exclamation point). Then, I would try to ping 127.0.0.0 (local host) on the 2000 machine. If that fails IP is not configured properly onthe machine. If that works try pinging it's own address. If that works check your network mask to make sure it is the same as the 98 machines, otherwise it might think they are on a different network. After that swap out one of the patch cables withone of the 98 machines. If that fails switch ports on the hub. If that doesn't work then I would suspect the network card. It has got to be one of those things, all you have to do is isolate where the problem is happening and you'll know how to fix it.

by goddessno1

Sorry.. Didn't help me. Actually Win2000 seems to have some (odd) cache about deleted NIC:s and their IP configuration information. As a last resort I cleanded every information related to networking I could find from W2k. Then I started the round again with the same HW and TCP/IP configuration. Now everything works as it should. And I can assure you that I know by heart how to find the usual errors with nwconnections. This was something else.

Thanks anyway for your time and effort to help me. I really appreciate it.

Asta
MCP,CLS

This discussion is closed to new replies.