9 replies
by josh
Try right clicking 'My Computer'(on the desktop or in the start bar) and going to 'Manage'
Then go to 'Disk Management'. There you should see your DVD drive listed as 'CD-ROM0'
Right Click where you see 'CD-ROM0' and click 'Change Drive letters and Paths', then click 'Change' and select the driver letter of your choice. Click 'Ok', and then 'OK' again. Close Computer Management, reboot your computer and see if your drive is listed in My Computer again.
by josh
by rcs5783
I tried the suggestion from josh@, but the CD/DVD drive is not listed in the disk management list. I still have the problem of win XP not recognizing the DVD drive. Under device manager, it states that the "device driver is properly installed, but windows cannot find the hardware device (code 41)". By the way; if it makes a difference, the DVD drive is a HL-DT-STCDRW/DVD GCC4244 model. Thanks for the suugestion. Any other suggestions?
by hal 9000
You could try Iolo's System Mechanic but in this case I would think that the best option would have been dell's first option which is to wipe the drive and reload Windows. I agree that the optimiser program is most likely the problem and the only real fix is a reinstall of Windows.
http://www.iolo.com/sm/6/download.cfm
Naturally backup any of your data before doing this if you can not Network the NB then remove the HDD & fit it to a USB Caddy and save the data to either a HDD in a different computer or to some other optical recordable media.
Col
It you have ruled out hardware issues and a 3rd party software is involved it is usually a registry problem. This could be caused by a corrupt entry of the upper and/or lower filters in the registry for that particular optical device.
Be aware that editing the registry can be dangerous, so before you begin any type of registry work make sure that you have a backup copy of your registry saved in a safe place.
Check these recourses:
http://support.microsoft.com/kb/314060/en-us
http://xphelpandsupport.mvps.org/how_do_i_get_windows_to_recognis.htm
http://www.plextor.com/english/support/faqs/SW00031.htm
busTRACE Technologies has developed a simple utility that allows you to view which filter drivers are specified for the Disk and CD/DVD devices on your computer. This applet shows you those filter drivers that are specified in your registry.
This is a useful diagnostic applet to determine which Disk/CD/DVD filter drivers various 3rd party applications have installed on your system. You can download this utility for free at:
http://www.bustrace.com/products/devfilter.htm
It you have ruled out hardware issues and a 3rd party software is involved it is usually a registry problem. This could be caused by a corrupt entry of the upper and/or lower filters in the registry for that particular optical device.
Be aware that editing the registry can be dangerous, so before you begin any type of registry work make sure that you have a backup copy of your registry saved in a safe place.
Check these recourses:
http://support.microsoft.com/kb/314060/en-us
http://xphelpandsupport.mvps.org/how_do_i_get_windows_to_recognis.htm
http://www.plextor.com/english/support/faqs/SW00031.htm
busTRACE Technologies has developed a simple utility that allows you to view which filter drivers are specified for the Disk and CD/DVD devices on your computer. This applet shows you those filter drivers that are specified in your registry.
This is a useful diagnostic applet to determine which Disk/CD/DVD filter drivers various 3rd party applications have installed on your system. You can download this utility for free at:
http://www.bustrace.com/products/devfilter.htm
It you have ruled out hardware issues and a 3rd party software is involved it is usually a registry problem. This could be caused by a corrupt entry of the upper and/or lower filters in the registry for that particular optical device.
Be aware that editing the registry can be dangerous, so before you begin any type of registry work make sure that you have a backup copy of your registry saved in a safe place.
Check these recourses:
http://support.microsoft.com/kb/314060/en-us
http://xphelpandsupport.mvps.org/how_do_i_get_windows_to_recognis.htm
http://www.plextor.com/english/support/faqs/SW00031.htm
busTRACE Technologies has developed a simple utility that allows you to view which filter drivers are specified for the Disk and CD/DVD devices on your computer. This applet shows you those filter drivers that are specified in your registry.
This is a useful diagnostic applet to determine which Disk/CD/DVD filter drivers various 3rd party applications have installed on your system. You can download this utility for free at:
http://www.bustrace.com/products/devfilter.htm
by ontheropes
Answer from Microsoft' site below:
A driver was loaded but Windows cannot find the device. This happens when Windows does not detect a non-Plug and Play device.
If the device was removed, uninstall the driver, install the device, and then click Scan for hardware changes to reinstall the driver. If the hardware was not removed, obtain a new or updated driver for the device.
If the device is a non-Plug and Play device, a newer version of the driver might be needed. To install non-Plug and Play devices, use the Add Hardware wizard. Click Performance and Maintenance on Control Panel, click System, and on the Hardware tab, click Add Hardware Wizard.
On the General Properties tab of the device, click Troubleshoot to start the troubleshooting wizard.
Me: Apparently, from their answer, uninstalling the driver and device completely then running the Wizard should work.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending