Discussion Locked

Win2000 pro policies on a NT 4.0 network

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello
I am running an NT 4.0 network with 1 PDC and 1 BDC with service pack 6a,and 150 win 98 clients. I need to install 4 win2000 pro workstations due to new software. We use user and group policies. From everything I read they should work on the new workstations but they don,t (yes I have a config.pol and a ntconfig.pol I also tried a ntconfig.man) but nothing worked any help would be gtreat thanks.
Sbaltus MCP CNA

7 replies

by qb

I've never tried universal policies on the 2000Pro's yet but I ahve used poledit on 9x amchines countless times. If you can't get that to work I know that you can log on the workstation as ADMIN and go into con trol panel, admin tools, local secuiry policy, local policies, security options. From there you can disable alot more that you can with ant .pol or .man file I've every configured.

by oridjinn

Unfortunately whatever you read was incorrect. Windows 2000 professional uses group policies, domain controller policies, and local policies. The group & domain controller policies can only be created using a Windows 2000 DC. Your only option in this situation is to create a local policy for each machine.

by allan

I'm using Group Policies in an NT4 environment.
I also have some W2K Pro machines. These machines WILL work with the policies.
Make sure you have the config.pol in the BDC Netlogon share. Use Poledit to open it and check that the config is the same on the PDC and BDC. Sometimes the replication doesn't work.
W2K Pro stations are harder to set up because you need to check the permissions on all the folders and shortcuts that the user sees. Some shortcuts (those that point to a file and assume the exe) need to be set up with the path to the exe in the shortcut

This discussion is closed to new replies.