Discussion Locked

win95/98 DNS settings for laptop mobile

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello everyone,

I have a user that has a DSL hookup at home. I tried changing the DNS settings so that his pcmcia ethernet card would use DHCP for his home setup and the adapter in his docking station would use settings for our network with a static IP. However, if I changed a setting in either of the TCPIP settings, the DNS settings would change for all adapters.
I thought it was possible to specify a different DNS server for each of the adapters? As it is, this user must change his DNS settings both when he goes home and when he comes back into the office.
Am I missing something overly obvious?

4 replies

by bmiles

I would use DHCP settins for both. The DNS address is given to the client machine when the IP assignment is made by the DHCP server. I have found it useful to setup a shortcut to winipcfg.exe and instruct the user on how to release and then renew the IP address.

by vcovco

Thats a good idea. However, the user has a static ip so that we can control firewall permissions on that particular ip as far as ftp access, etc.

by gary mintz

Sounds like you need to set up different hardware profiles. Do you have you have a docked and undocked mode on boot-up? If so is the pcmia card disabled in docked mode and enabled in undocked?

by vcovco

The pc card is, in fact, disabled in the docked profile, but I believe it is still showing up in network properties even though it is not in the hardware profile. I will have to double-check. Thanks!

This discussion is closed to new replies.