Discussion Locked

WIN98 boot failure - dell bios

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've just rebuilt my wife's old Dell XPS T450, including a new system board. Kept the old hard drive. When I started the system, Win 98 failed to boot and gave this message.
Y2000RTC This software is only for Dell bios.

I renamed the windowsfolder to 'windold' and installed a fresh copy of WIN98, but the same boot failure occurred.

What can I do?

7 replies

by tduval

Real Time Clock for Y2K purpose ?

I think, you'd better fdsik, remove partition, and re-install W98 from scratch.

It's often that old installed hard drives can't boot with a new hardware. this seems to be a y2k patch installed many years ago, to correct RTC defect.
May be safe mode boot, then removing any annoying resident ?

by fred07

If you are trying to save data get another HD and make it MASTER and your old one SLAVE and install the 98 on the new one. THEN open explorer on both and drag and drop or use the BREIFCASE feature to save the data. THEN full format SLAVE as extra HD space. PS you will have to install all programs to NEW HD so that all works well in transfering.

by pierrejamme

Look in msconfig for anything resembling rtc. In 1999 Dell put this fix out, and I believe the command started in Autoexec.bat. We removed the command with no harm. Since you didn't use a Dell motherboard you are getting this error.

This discussion is closed to new replies.