Discussion Locked

Win98 Install failure

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

When installing on a FX M/B P166 client comp the install gets to the begin loading files stage and halts.
Tried I/O card, different HD etc I guess it is the board has had it but wondered in what area?

5 replies

by emc systems

MGray:
Do you get a GDI error? If so then it is 99% of the time a memory error. If not then first install the HD configuration software from the manufacturer. Boot computer without floppy until message appears if you want to start from floppy press * * (Ctrl+A for EZBios). If that doesn't work try putting the hard drive on IDE channel 1 and the CDRom on IDE Channel 2.

Success
Erik
EMC Systems

by dmiles

Did you try the video card and memory,and if you think it is a bad board then it is not going to help trouble shooting it.What operating system are you trying to load? the files could be corrupt from your boot disk.

This discussion is closed to new replies.