Discussion Locked

Win98 MBR changed by W2k HELP!

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I wanted to install Windows 2000 on my pc and when it wanted to re-boot I said ok. The problem is that my cd drive is not bootable so I declined the installation. Now each time I boot the machine I get that Windows multiple boot screen which shows windows 98 but the default is windows 2000.
Is there a way to get rid of this or even change the default to win98!
If I dont change it with the arrow keys and it counts down to zero then it tries to boot win 2000 and of course cannot.
H E L P please. Thank you.

9 replies

by billharps

I haven't used Win2k so this may not be of help

Win 95 - 98 uses the "msdos.sys" file to control boot-up.
1) locate and make a backup copy of "msdos.sys" in your C:\windows directory.

2) Use notepad to edit it
msdos.sys.txt
or
SHIFT+right-click open-with

by memery261

Go to your root drive ( C:\ )
and remove the boot.ini file.
Windows 98 does not use this file.
after removing the boot.ini only windows 98
will boot.
you could alternitivly remove the windows 2000 entry from the boot.ini

This will fix your problem

memery26

by gardbc

This man speaks the truth.
I have done this and it will (should on yours also) work.
BMaN

by yuli

Editing the "msdos.sys" will not help you. You can edit "boot.ini" to change the boot default to win98. If you want to get rid of the boot menu, you need to restore win98 Master Boot Record. First, you must have a windows 98 bootable floppy diskette, copy two command files "fdisk.exe" and "sys.com" to the floppy diskette. you can find these files in c:\windows\command folder. start your compuer from floppy disk. under DOS prompt, run the command:

a:\>fdisk /mbr
or
a:\>c:\windows\command\fdisk /mbr
if you don't copy this commnad to floppy disk.

Then run the next command:
a:\>sys c:
or
a:\>c:\windows\command\sys c:
( you must run command "sys c:" under "a:\>" dos prompt)
remove the floppy diskette and Reboot your computer.

by milind.talekar

Boot in Windows 2K
then Go to My Computer Icon
Right Click it and Select Properties
Got to Advanced Tab
Select Start Up and Recovery
Now in the Default Operating System Drop Down Menu Select Windows 98
If you want the Time for which the menu shows to be less than select
Reduce the Seconds Box
If u only want windows 98 then unchechk the box which says
Display List of Operating Systems for _ seconds

Hope this Solution helps you

by nik.wadge

I assume that W2k is an original licensed version and is the only Operating System you want on the PC. If so Microsoft will have supplied a Boot disk for it ( its a floppy so dont panic ) turn on your PC with this disk in the drive and use it to partiton and format your hard drive. Once this is done you will have to restart the machine and you will have the option to start the system with CD-Rom support. Then its a simple case of running setup from the E: drive ( D: will be a ghost drive used by the system for the cd drivers )and voila!! W2k ready to roll.

by jbane

GervGuy,
This is the discussion board, not the Technical Q&A. This is for expressing and sharing ideas, not getting help on the latest problem you are having. That is why there is a Tech Q&A section. By posting your questions here you don't have to ante up when someone answers your questions and you don't have to look bad by rejecting good answers to your questions to save your points. To me, thats cheating. This is my opinion, and since this is a discussion board I think this is an oppropriate place for it. I'd like to hear what you have to say about this and anyone else. Your comments are welcome. Does nayone else feel like he is getting Tech ?'s answered for free? Does anyone feel that I should just ignore it, let it go? orthat I'm making a big deal of something that is trivial? Please let me know what you think?

by polubes

MBR is already overwritten by NT. So, minimal
efforts are to let work to the NT loader.
Don't remoove file bootsect.dos (it's a
new storage of previous MBR).

BOOT.INI contents originally looks like:

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(1)partition
(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(1)partition(1)\WINNT
="Microsoft Windows 2000 Professional"
/fastdetect
C:\="Previous Operating System on C:"

Here I used indent to indicate that indented
line is just continuation from the previous
one. After editing BOOT.INI should look as
follows (unselect Read Only attribute
before editing to be able to save the file):

[boot loader]
timeout=5
default=C:[operating systems]
C:\="Previous Operating System on C:"
[multi(0)disk(0)rdisk(1)partition(1) WINNT="Microsoft Windows 2000
Professional" /fastdetect]

That's it.

Last line doesn't "work": it is commented
by [ ]. If you want to see it in menu -
open square brackets.
timeout=5 defines 5sec delay for your
decision. In root directory of C:\ should
be located files: io.sys, msdos.sys,
command.com, ntldr, ntdetect.com, boot.ini
and bootsect.dos

You should NOT edit msdos.sys unless you
want additional menu of Win95 itself. Later
you can use this scheme for builting
the multiboot system.

by polubes

Indent is not accepted by the discussion
software. So, use your common sense and
your own boot.ini as an example to
separate one line from another in my
first advise.

This discussion is closed to new replies.