13 replies
by c:\\>
by itp
by c:\\>
If you're going to go on IP only, make sure that you assign static IP addresses on each of the machine, and that you put them on the same IP subnet. (i.e. IP address 192.168.1.x) where x can be the station number and the subnet mask should be 255.255.255.0. Then you go at every machine and try to ping them. If they don't reply, something is wrong.
You can also make the network IPX only, which will eliminate the headache of assigning the IP's yourself.
What also you can try, is reinstall the network card all over again.
by itp
by jlouis45
Try increasing the printer memory and also the change the option send directly to the printer with RAW type.
HOpe this works
by itp
by shmaltz
Befor you try any thing make sure that the cable you use is:
1.CAT 5
2.crimped according to 568-A or 568-B
the second one you dont have to try if you have a precriped cable.
by itp
by shmaltz
I also use the HP 4000 printer connected to a lpt port on a windows 98se machine and it works fine. if you have problems try using on the client computers the HP LaserJet III printer driver that MS supplies instead of the drivers from HP.
I have already changed the way it is connected also that instead of being connected directly to a computer its connected to a network LPT port from Axis which is configured on a WINNT server instead of a WIN98SE machine which works much better, since on the 98 machine it slowed down a bit the 98 machine that served the printer.
by itp
I found the answer the w32.hllw.bymer virus. The Virus goes out through the network card and tries to find another host via TCP/IP. The Virus also effects the Shut down of the computer. Removing it solved all my problem.
Thank you all who replied
Brad
by baziite
Just go to printer properties by right clicking on the network printer you setup then , On the details tab press spool settings .Make sure that "spool print jobs" and "start printing when first page is spooled" is checked then OK/APPLY . Then press Capture printer port . On the Capture dialog box type the path of the network printer make sure you check "reconnect at logon " then APPLY/OK all the screens . Now logoff and logon ....Your problem should disappear .......
Good Luck !!!
by itp
I found the answer the w32.hllw.bymer virus. The Virus goes out through the network card and tries to find another host via TCP/IP. The Virus also effects the Shut down of the computer. Removing it solved all my problem.
Thank you all whoreplied
Brad
by itp
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending