Discussion Locked

Win98 SE- Internal Modem : Pulse !!

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Reinstalled software for a conexant soft56
RTAM PCI modem....now modem uses pulse instead of tone on dial out.
I can connect ok to internet but would like to return to 'quicker' tone dialing

What's the reason?

What's the solution>

3 replies

by shiny_topadm

Hi, I don't really know the reason, since it's backwards from what should be the default value, BUT...go to Settings>Control Panel>Modems. On the first screen should be a button for "Dialing Properties". There should be a line (exact location & wording depends on the driver version) "The phone system at this location uses Tone dialing or Pulse dialing. Check to see that "Tone" is selected. Sometimes, on a re-install, this doesn't get reset properly. If this doesn't work, let me know, because there are some other things to check, but they're not very likely! Good luck - Will

This discussion is closed to new replies.