Discussion Locked

Windows 2000 Automatic Shutdown

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
In Windows 98 when you click Start then Shutdown, the program automatically closes and turns off the power. In Windows 2000 when you click Start then Shutdown, the program closes but a screen then appears with the instruction to turn off the computer. How can you make the W2K shutdown sequence to turn of the computer power?

9 replies

by arwjnplanotx

I don't know about 2000 but I don't think it's possible in NT. I believe 2000 has those same attributes.

by sowens01

This is a feature of Advanced Power management. Win 2k does support this feature (in theory) it may not work on your machine. The first thing to check is the device manager in Win 2k and see that the advanced power management feature is installed if it is then remove it and reboot. Also double-check your BIOS to ensure that the Advanced Power Management is enable. Don't forget to check your power management settings icon in the control panel. If it is not set to allow Windows to manage power it will not work.

by eyek

Tweak the registry settings:

Enabling the setting will cause Windows 2000 to automatically powerdown your computer once it has finished the shutdown process.

Registry Settings:
Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
Value Name: PowerdownAfterShutdown
Data Type: REG_SZ
Data: (0 = disabled, 1 = enabled)

*Modifying the registry can cause serious problems that may require you to reinstall your operating system. I cannot guarantee that problems resulting from the incorrect use of the registry can be solved. Use the information provided at your own risk

by jc2436

In the Control Panel, Open Power Options and select the APM tab. Checkmark the "Enable Advanced Power Management Support". Your motherboard must be able to support APM.

This discussion is closed to new replies.