windows 2000 crashed with bug check 0x0000001e (0xc0000047, 0x8042f18a, 0x8
Hi,
One of windows 2000 Terminal server has crashed with BSOD,
with Bug Check 0x0000001e (0xc0000047, 0x8042f18a, 0x80452b79, 0x00000004)
After analyzing the full memory dump i found that IMAGE_NAME: savrt.sys is causing problem.
savrt.sys is from C:\Program Files\Symantec AntiVirus\
I have attached the debug anaysis below please help me to find a fix for the same.
Thanks
Vatsa
ugCheck 1E, {c0000047, 8042f18a, 80452b79, 4}
*** ERROR: Module load completed but symbols could not be loaded for savrt.sys
Probably caused by : savrt.sys ( savrt+156b7 )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: c0000047, The exception code that was not handled
Arg2: 8042f18a, The address that the exception occurred at
Arg3: 80452b79, Parameter 0 of the exception
Arg4: 00000004, Parameter 1 of the exception
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000047 - An attempt was made to release a semaphore such that its maximum count would have been exceeded.
FAULTING_IP:
nt!KeReleaseSemaphore+38
8042f18a 85db test ebx,ebx
EXCEPTION_PARAMETER1: 80452b79
EXCEPTION_PARAMETER2: 00000004
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: System
EXCEPTION_RECORD: f68632d8 -- (.exr 0xfffffffff68632d8)
ExceptionAddress: 8042f18a (nt!KeReleaseSemaphore+0x00000038)
ExceptionCode: c0000047
ExceptionFlags: 00000001
NumberParameters: 0
TRAP_FRAME: f6863254 -- (.trap 0xfffffffff6863254)
ESP EDITED! New esp=f6863604
ErrCode = 00000000
eax=00000000 ebx=00000001 ecx=00000000 edx=00000000 esi=877dedc8 edi=00000002
eip=8042f18a esp=f68632c8 ebp=f6863618 iopl=0 nv up ei pl zr na pe nc
cs=0000 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00000246
nt!KeReleaseSemaphore+0x38:
8042f18a 85db test ebx,ebx
Resetting default scope
LAST_CONTROL_TRANSFER: from 804341ee to 804308ea
STACK_TEXT:
f6862eb0 804341ee f68632d8 00000000 f6863254 nt!KiDispatchException+0x30e
f6863224 8046b93f f68632d8 f6863328 00000000 nt!KiRaiseException+0x16c
f6863240 80468389 f68632d8 f6863328 00000001 nt!NtRaiseException+0x33
f6863240 8042f18a f68632d8 f6863328 00000001 nt!KiSystemService+0xc9
f6863618 bf7976b7 877dedc8 00000000 00000001 nt!KeReleaseSemaphore+0x38
WARNING: Stack unwind information not available. Following frames may be wrong.
00000000 00000000 00000000 00000000 00000000 savrt+0x156b7
STACK_COMMAND: kb
FOLLOWUP_IP:
savrt+156b7
bf7976b7 85ed test ebp,ebp
SYMBOL_STACK_INDEX: 5
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: savrt
IMAGE_NAME: savrt.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 422cda85
SYMBOL_NAME: savrt+156b7
FAILURE_BUCKET_ID: 0x1E_savrt+156b7
BUCKET_ID: 0x1E_savrt+156b7
Followup: MachineOwner
---------