Discussion Locked

Windows 2000 Pro file sharing

0 helpful
18 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I want to share some of my folder over the networked computer with Windows 98 OS. I have already shared the file on my Windows 2000 Pro, and when I tried to open it on one computer with Windows 98 I can't open the file.

Thanks,
Jojit

18 replies

by l.van.de.werken

It's best to be in the same workgroup. When you use a domain, you first have to be authenticated by the domain's PDC or BDC.

You also have to check the permissions tab of the shared folder, and the security tab when uou use a NTFS partition on your 2000 Pro pc. Make sure you log in the the network anyway..

Good luck

by jhoejhit

Workgroup on both computer is the same, and Windows 2000 Pro with NTFS system; Both computer can use one Internet connection(ICS)at the same time. Win2K can open shared files on other side computer with Windows 98 OS on the Network places, but Windows 98 computer can't open shared files of Win2K because it's asking a password. I tried to enter administrator's and user's password but didn't accept it.

For info, I never use any password on Win2k computer except administrator and user password.

by cul8rm8e

as you know your windows 2k has administrator sharing as default for c$, try running the command from your win98 pc, type in the (run) \\name of your win2k pc\c$ this should alow full access to your win2k c: drive,from there why dont you make a shortcut to all files and folders you require access to (dektop) sounds good,and in the future if you require to access any other files or folders its as simple as running the command! also make sure that you have added a username to your win2kwhich you also use on your win98, (and use same password when you connect to the win2k pc) this is a simple way of doing this withought any issue of user rights you will always have full access. let me know how you get on,i hope this has been of some help to you

by vintage

Hi,

When we are talking about a 'workgroup', the user credentials are stored in the SAM (Securities Account Database Manager), if the W98 client needs to have access to a W2K share, you will have to install the user-id of the W98-client in the SAM of the W2K.

Go to the Control Panel - Users and Passwords, verify that the userID and the PW is exactly the same.

Perhaps this is a solution, this worked for me a few weeks ago.

Keep the faith
Vintage

by freemanzen

Jojit,

your prob could be due to yr setup of W2K in NTFS file system which W98 could not read..
try to move the file to a FAT system if you hv on yr system before sharing out the file...

Rgds
Zen

by jhoejhit

I have shared the disk that I have put on it's mobile rack wich I am sure it's FAT32 system. The thing is that how can I have acces on Win2K computer from win98 computer. Win2K netname can ba found on win98 network places but trying to open it will ask you the password on Computer Netname password. ...netname.c$, I ahve enetered admin password nor user password but didn't accept it.

by dave4e2open

Are you running with the latest SP2 on the Win2K machine?
One of the patches in SP2 is for Win2K file sharing with networked PC's from earlier O/S'. I have had success passing files between Win2K and Win98.
Hope this info is helpful.

by ominton_g

If your win2kpro is formatted as ntfs dynamic disk win98 will be unable to read it.Good luck.

by vintage

Hi,

If I am not mistaken, the fact that the W98 client is not able to connect to the share on the W2K has nothing to do with the fact that the W98 does not understand NTFS.

A W98 cannot access a NTFS-formatted local disk, yet it is able to connect to an NTFS-formatted disk over the network, as you use TCP/IP in that case, which 98 clearly understands.

Grz.
Vintage

by cul8rm8e

im glad that is clear to all the others,im wondering why so many ppl feel that this could be an issue,just imagine the chaos that would be caused if all our ISP`s had servers formated with NTFS,sorry if this sounds a bit cold but.... we do look for the correct solution if possible withought trying to find a fault!

dont take it to heart guy`s :)

by dan_tap

Hi,
Both 98 and 2000 are fat32's the only difference is 2000 is an NTFS systems which incorporates the NT os. It doesn't matter if you have different workgroups in a network. You can share files and folders in both 98 & 2000, have you tried creating a user and password in your 2000 workstation, to do this use the administrative tools, choose the user profile and create the user name you are using in your 98 system together with password, after that specify which folder or files your going to share in your 2000 system, and then add the user name and password in the folder profile. Hope you try this see if it works.

by shuff1

I have always had to create a share on the 98 box and connect to it from the 2000 box. This can only be accomplished from the 2000 to the 98 box.

by bikergeek

In addition to the excellent points made by other posters, also double-check the length of the share name on the Win2K box. I ran into this - the share name on the Win2K box must be less than 12 characters or so in order for Win9X to be able to see it.

Good luck!

by arnoldal

Try setting an ID for the Windows98 Machine and login to the windows 98 machine with that ID that you created on the Windows2000 machine, Password and ID name must match on both machines. Once you have done that it should work.

by jhoejhit

All users and clients needs to have access for Win2K computers must have an account at Users and Password Area (Securities Account Database Manager) to have an access; administrators has the right to add users and client users to have access to a Win2K machine.

I have solved the problem by adding my friend's login name and password that he's using on his Win98 machine. Everything is fine: My Win2K computer serves as ICS server and it works fine, Win98 client can use my printer, and open allfiles that I have shared on my Win2K machine.

To all members who shared their ideas thank you very much for your great help that help me solve this issue.

Jhoejhit

by lbmw

Log on to your Win98 machine w/ admin credentials you use on your Win2k machine- then you can browse to it in Network Neighborhood. Or.. if you know the net use cmd you can do it from the CL. Also- try this:
a. Read up on the OSI model
b. Read up on authentication methods
C. Read up on File systems
You are NOT having an NTFS problem. You ARE having a PEBKAC error (Problem Existing Between Keyboard And Chair). Sorry, but this is supposed to be a "Professional" discussion group. This is a problem my mother could probably figure out and I have seen some of the most ridiculous possible causes thrown out for consideration that it makes me cringe. If you can't figure out how to solve this on your own.... you really shouldn't be here!

by vintage

If it is that simple, how does it come that I receive the same question every week at least twice during the courses I teach at a CTEC?

This problem was solved due to the interaction of the group, if you find that you are so good ... start your own website. TechRepublic is all about helping eachother, not about killing eachother.

If you find yourself so damn good, how does it come, that there are still around 1.200 questions open -in the Q&A-part of the website- that are related to W2K???? Why don't you answer them?

by bikergeek

I find your comment to be as unprofessional as it gets. People who stand up and ask questions so that they can learn what they don't know ARE professional to me. Others, such as yourself, who criticize others for what they do not know are ones who should not be here and are unprofessional in my eyes. Perhaps you should not be here?

Oh - and was your mother born with infinite computer knowledge so she never, ever has to ask any questions? If so, perhaps she passed those genes to you so you already know all there is to know as well? Have you ever asked a question to others or come across something new? Ever been to a training class? I'm curious to know...

This discussion is closed to new replies.