Question Locked

Windows 2003 Firewall not working conflict with Ipnat.sys

0 helpful
19 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to access Windows Firewall in Windows 2003, but I keep getting this message: Windows Firewall cannot run because another program or service is running that might use the network address translation component (Ipnat.sys) .

I did everything, I stopper RRAS and looked if I can stop Inat. but nothing. Still can't access the firewall and i reall need to put a port as an exception. Mysql port that is 3306.

Please help if you can, I've read so many q&a about his problem and all say stop RRAS. But with me it's not working.

19 replies

by thomas

I have the same problem. RRAS is not enabled on my Win
2003 server but I still can't run Windows Firewall.

I am doing IP Filtering in TCP/IP but even with that turned off
it won't load.

by abahou

Hi thomas!
I found it! basically you should not go and stop RRAS from SERVICES..you should right click My Computer -> Manage -> Services and Applications -> RRAS! you'll find it with a red box next to it, right click and click on DISABLE! it will tell you will have to reconfigure later on which is ok!

by jtan

Hey abahou,
Thanks mate, totally worked.

JT

by jtan

Hey abahou,
Thanks mate, totally worked.

JT

by ddanf308

found myself with the same problem and your solution worked wonderfully.

by sikhan555

Dear

I try this but i wasn't successful, what we do,
if you have any solution regarding this please email to sikhan555@hotmail.com,

On my server, the windows xp machine is not access, can you help me regarding this ???

please reply.

by peman

Thank you very much!
Anyone knows why?

by fatz.kc

i couldn't work it out so thanks very much

by srini_sg

Hi,
Can you check if RRAS is configured on the machine?
Open the RRAS console( Start --> Run --> rrasmgmt.msc)

If RRAS is configured then that is the reason why firewall is not starting.
Disable RRAS(Righclick --> Disable Routing and Remote Access)
and then try starting firewall.

by ashunt677

I had the problem of no one being to access DNS or ping the forest root. So i removed "VPN" from manage your Server, then rebooted.

by meirdkl

I removed the role of my srv2k3 for vpn
and then it worked fine
and i could manage the firewall

by sergenet

I have the same problem and have not been able to solve it. None of the suggestions worked for me. Still trying to find an answer.

by bigb_g

We are having a recurring problem on SBS 2003 server.

Every time it is rebooted, the Windows Firewall Service does not start and reports a conflict with ipnat.sys. This causes the server to refuse any incoming connections from clients.

The fix is to disable RRAS, start Windows Firewall, then enable RRAS, and the issue is resolved. The next time the server reboots, however, we get the same behavior again (windows firewall does not start and no incoming connections are accepted).

Please advice i want both the Windows Firewall AND the RRAS service are started successfully with no errors.

Thanks
GEEJAY

This discussion is closed to new replies.