OK, I worked on this Sat, well part of this. Let me explain a little more in detail how I have my network setup and then maybe this will make sense.
First, I was so looking forward to trying this mx record stuff. I was convinced this would work and fix everything.
Internet - Modem -
Netgear Wireless Router (DHCP off)
- Win 2003 Server
- domain workstation
- DLink wired router (DHCP on)
- stand alone PC 1 (not on domain)
- stand alone PC 2 (not on domain)
Everything was working fine. The DLink router is basically just an extender because I needed more ports, and that is what I had at the time. So I figured it was all good however when I tried to hook the domain workstation up on the DLink router and couldn't hit the Internet or email. So I figured it was the DHCP on the DLink router. I took that off, and could hit the internet but no email on anything that was plugged into it. So I dug around and found a switch which is what everyone told me to use.
So that was first on my agenda Sat. I was going to switch out that switch and Dlink router, and then try to fix the email thing that I posted about.
Switched the dlink router and switch out, and basically plugged the non domain workstations into the switch. So now it looks like this
Internet - Modem -
Netgear Wireless Router (DHCP off)
- Win 2003 Server
- domain workstation
- SWITCH
- stand alone PC 1 (not on domain)
- stand alone PC 2 (not on domain)
So now the non domain workstations can hit the Internet, but can't send or receive emails at all. I figured I need to fix this before I even start on the mail server and mx record. Since now not even the non domain PCs can email.
It has to be a port thing or something??
This may explain why I couldn't email with the Domain Workstation when it was logged into the domain, hitting the internet and everything just fine. I hadn't installed the mail server piece yet or anything. I was just using the pop3/smtp settings in Outlook.
I am going to work on this again this evening, and hopefully get this figured out. Once I can get the whole switch email thing figured out then I will go forward with the mail server and MX record, etc. Any ideas on the switch issue? On a workstation that works just fine emailing and on the internet and is not on the domain, but when you plug it into the switch, it stops being able to send and receive emails?
Any help will be sooo appreciated!!! It may be a simple fix, like opening a port?? But I don't even know where to begin on that. The windows server doesn't have the firewall turned on, and the workstations don't have their firewalls turned on, the Netgear router has a built in firewall. Could this be the cause? If so, how do I fix that?
Thanks