Discussion Locked

Windows 95 Product ID on the CD-ROM Disk

0 helpful
24 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi:
I'm attempting to install an old copy of Windows 95A on a PC to test a software application. I'm the registered owner of this copy of Windows and I have the original CD but the Certificate of Authenticity is nowhere to be found. Does anyone know where (or if) the Product ID number can be found on the original CD? I would think the ID # would have to be on the disk to match the ID # that's entered during the installation process. I've looked through a number of files using a hex viewer but haven't had any luck. Thanks.

24 replies

by arwjnplanotx

It's on the back of the CD case. The case may have been white cardboard with the Wondows 95 logo and clouds or a plastic jewel case. The Product ID number will be on a yellow sticker.

Good luck.

by andrea

The serial number is not on the disc. It's based on a mathematical formula of some kind - any valid serial will unlock any CD (as long as the serial number format matches).

either yours will be in the form:
xxx-yyyyyyy (early non-OEM) or
xxxxx-OEM-yyyyyyy-zzzzz (later or OEM)

If you've got the xxx-yyyyyyy version, one of the three possibilities in the sequence 41[5,7,9]-1234567 should unlock it. I've never found a pattern to the OEM version, though I'm sure one probaby exists.

If yours is the OEM type and you're really stuck, email me. I have many spare OEM Win95 Certificates gathering dust at my office, and would happily mail you one.

by dmiles

Open the Control Panel,double click on the system icon,then when window open,look on the general tab it will be shown under the registered owner's name info

by Member 30576776

I don't know where you can find it on the CD, but I would use a product ID from another machine in your office. All that really matters is that you can produce proof of purchase for licenses for each machine that you have. You are welcome to use oneof mine if I can find it. howard_pincham@yahoo.com

by vijaychandran

it has to be in thr cover of your CD. if not found try as below
if it is an OEM version try this "34997-OEM-0028585-14586"
if a retail version try "419-1234567"

by jun1cez1

The Prod ID you're looking for is in the registry but unfortunately at this moment i just cant simply remember where to lead you.
However, IF you are doing re-fresh installing Win95 you could simply wipe out all info in the drive and use someone else's Prod ID. Or you can go to WareZ666.com to get one. The last option is really something i would'nt recommend but it works. It mat be somehow bad but it seems to be your only solution unless you feel like reading all the number listed in the registry.
Wish you all the luck.

by parier

Providing that you have the current version installed in any PC, otherwise this will not work!!

Open system.dat in DOS, ((Edit system.dat))
I can't remember what folder it resides in, but you can find it in dos by typing dir system.dat /s this wiull search the whole partition for the file and return the location.
Then do the edit thingy. After you open it, you'll notice text everywhere, Do a search for "Productkey" one word. If you dont see it, look for product only, it may be there more than once, but you will find YOUR origional Product Key to the right of it.

If you have any questions, please let me know.

Eric

by clover252525

Start regedit via START/RUN, and look under:

HKEY_LOCAL_MACHINE/Software/Mirrosoft/Windows/CurrentVersion.

You will find a line there: ProductID. This is what you need.

clover

by earnest

Hi,
Try all "1". Win95 doesn't care just that
all fields are full, at least that's what works for me.
Good Luck,
Bo

This discussion is closed to new replies.