Discussion Locked

Windows 98 Crashes

0 helpful
19 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have been having problems with Windows 98 crashing at various times throughout the day. Then it crashes (totally freezes up) numerous times during the reboot process.

The problem is not consistent, and I cannot duplicate the problems that are causing the system to crash.

Also, whenever I run the Windows defrag program to defragment my hard drive, it seems to get to about 91% complete and then the system freezes up - every time I run the Windows defrag program. Any help would be greatly appreciated here. My hard disk is about 60% defragmented and I cannot get it to defragment completely.

19 replies

by dmiles

You did not mention any error messages were coming up at the time of freezing.
Check to make sure their are no programs running in the back ground at the time of defrag.(anti virus)
Update the BIOS if you need to.
Run scan disk to check for any hard disk errors.
Disable the power management
Do an update to your video driver.

by joeuser

I'd try defraging that disk in safe mode (f8 during boot up). if defragging is done and problem remains...and its freezing during reboot, I'd check for any overclocking, faulty ram, bad hardware.
good luck

by mzy

This problem is not specific. If you are running programs like Adobe Photoshop, you may not have enough RAM to run programs, therefore it will freeze or crash. Another problem could be your hard disk problem, it may have an error. Try using scandiskor Norton Disk Doctor. As for the defragmenting, I would also advice you to try it in safe mode, but using Norton Speed Disk is faster. Both Norton programs are good substitutions for the Windows Scandisk and Disk Defragmenter. Hope these will solveyour problem, Maozy.

by Former member

Run scandisk and do a surface test. You may have some bad sectors...HD going bad...

by mattyre

I have Windows 98 and have many of tose problems. As far as the defrag goes... shut down as many of the runningitems as you can without closing down the system, especially close down all networking items. use the .. ctrl alt del keys to shutdown apps then restart the defrag

by gacain

This does sound like a hardware - not a software - problem. Perhaps the HD is the problem, but also check all other hardware. First open the box and check all slot and cable connections. I've seen this sort of problem come from something as simple as a loose video card. Swap out video, sound, NIC, etc devices to see if this solves the problem. You may also want to try re-installing Windows. Best of luck to you.

by radovan

First clean disk from files *.CHK *.TMP

Defrag problem:
Run explorer click on windows folder
In windows folder locate folder APPLOG
Delete all files in that folder they are used by defrag to rearrange files for faster application execution. If some files are corrupted in some way defrag will crash.
Run scandisk Through metod
Run Defrag
General computer crashing:
You will need some tools to open your computer, and ink remover rubber. The best one is looking like pencil you'll need it to clean SIMM connectors and card connectors from dirt and oxide. Open computer take out ram and polish SIMM gold edge repeat procedure for all cards if you are using slot 1 or A processor you can clean it too

by bv2

Boot to safe mode - run thorough scandisk, then defrag. Reboot and run system file checker under system information - I've found that a lot of crashes on Win98 machines were due to corrupt Active X files. Restore needed files, reboot, defrag againif you truly want to...

by sixfourtykilo

Although the answers given seem very obvious they're both right and wrong. Although these are basic steps in diagnosing the crashes, random crashes generally occur due to cheap memory gone bad. If you are convinced your HD is the problem, start over. Crack open your case and find out the exact cylinders, sectors, heads, model number and manufacturer of your HD. Contact the manufacturer's website and get ahold of a low-level formatting utility. Prepare for 2-6 hours of formatting when you run it. Be sure to BACKUP! Low level formatting wipes out everything, including every type of partition. If you find your system manages to crash and hang during or after this process, your problem will most likely be the memory. If the utility reports numerous bad sectors your HD can be to blame.

This discussion is closed to new replies.