Discussion Locked
0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Upgraded my Win98 to WinME (Windows Millennium, full version)..Everything seems to be working fine, no problems with the install, however, my modem (BestData 56K), will now dial my ISP, verify user name and password, but it stops after that. It willnot load any pages, bytes received will not go over 435 or so..Any clues?
6 replies
I had this problem and it turned out that it was not verifying the username. Somehow, it was scrambling the password and could not get logged on. Turned out that my modem had a problem.
Ask your ISP to monitor your login attempt, they told methat the username and password were not correct. Even though it was setup correctly and the modem acted like it was working, it was scrambling the data.
Good luck,
Don
by khwa
Different problem...thanks for the input.
by tuck46
a lot of times when doing an upgrade you have too go in and extract winsocks in order to browse. Go to start, run, type in sfc, click on extract one file from .....extract winsock.dll to c:\windows and extract wsock32.dll to c:\windows\system. If you still cant browse, remove tcp/ip out of network in control panel and reinstall it.
by khwa
Sorry, this wasn't it...
by arwjnplanotx
Remove nad reinstall Dial-Up Networking, TCP/IP for your Dial-Up Adapter and your modem. You may have to recreate your dial-up connection(s) so make sure you have all the information written down.
by khwa
Reinstalled Dial-Up Networking...took care of the problem...thanks for your input..
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending
0 helpful
15 replies
Question
Is WSL still relevant in 2026?
0 helpful
1 reply
0 helpful
2 replies
0 helpful
10 replies
Question Unanswered
i need help in transferring my bulk emlx files
0 helpful
0 replies