Discussion Locked

Windows ME Networking Problem

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a pair of "hybrid" machines I built and have connected to a home network. I have a cable internet connection and both machines and the cable modem are routed through my hub (cable connected to uplink port). My main problem/complaint is that for some weird reason I can only get one machine to connect to the internet at a time, and I cannot see either machine from the other in My Network Places (Network Neighborhood in Win98. I have identical protocols and clients installed on my network. I have inspected all cabling, hub, and ethernet cards and all are in perfect working condition. Whichever computer I turn on and connect to the network first is the only system that can access the internet. Any suggestions??

7 replies

by fgarber

If you subscribe to AT&T @home they only allow one ip address per customer unless you subscribe to their "additional" services. There are some ways to get around it though. a webramp type router is fairly inexpensive (www.ramp.com) or if you checkout some of the answered questions here you will find other ways.

by jason

If your setup is correct as you mention, then you ought to check MS website for a Windows ME patch update that fixes a WinME bug relating to Networking. I was trying the same thing, and could not get the systems to see each other to share files/internet. Once I applied this patch....no problems...

by neos_101

Very simple.... Run the Home networking Wizard in Windows ME and turn on ICS and you should not have a problem, you just need to make sure that you are not using routable protocals so the ISP won't see your other computer

This discussion is closed to new replies.