Discussion Locked

Windows Server 2003 and HP Deskjet 6940

0 helpful
16 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Just bought an HP Deskjet 6940. I hooked it up to my network and assigned it an IP address. I then attempted to add the drivers that came with it to a Windows 2003 server (used as a terminal server). Much to my dismay, HP does NOT support windows 2003 server. The driver stopped loading. I wrote HP support about any drivers for the 6940 and they stated back that no drivers are available for the windows 2003 server. I have attached the printer via a cat-5 only to the network & not to any individual machine. Being a programmer, I looked for 'similar' devices. I tried the windows supplied HP Deskjet 694C driver. I added the tcp/ip port and BINGO - I got a test page. Don't know if anyone can use this information (may work also on the 6980 printers - same HP driver as the 6940).

16 replies

by mauricejoconnor

Hi tomm344462,

I encountered the same issue with my 2003 server and the HPDJ 6940.The driver you suggested works a treat! Many thanks mate, youve saved me a a considerable amount of hassle.

thanks again,

Maurice

by larryl

Thanks for posting that. I need to use that locally attached printer on an RDP session to a Terminal Services 2003 server. Big help!

by smiller

I'm using Presentation Server 4.5. The user (400 miles away) logs into the presentation server and needs to print to her local DJ6940 printer. I'm using the DJ694c drivers like many are, but the printouts seem to be shrunk down to about 60%. There's no control over that and I'm kind of stuck.

by standardit

I just setup in citrix farm and used the 694c driver. I am having the same issue with the printouts being shrunk down. Did you find a fix?

by suewhitehead

I tried to use this work-around to set up a new HP Deskjet 6940 on our network. Some pages printed with the text squished up on the page. The newest 2008 drivers CD now includes 2003 driver. It doesn't say so on the label but when I tried to install, the wizard listed 2003 as one of the drivers, finished the installation and prints correctly.

by v_mathieu

(Sorry for my bad English, i' m French)

The installation of a Windows XP pilot for Windows Server 2003 must normally always function, because the only difference between these two systems is that Windows Server 2003 has a core more recent than that of Windows XP, therefore the pilots are inevitably compatible between the two systems.
But you know, HP, it are odd, then one should not seek to understand why it do not have to correct the bug compatibility.

Here is the solution:

Start > Settings > Printers and telecopiers > Files > property of the server > Drivers

Add > Next > Next > provided Disque > Browse >

Select the Cd reader which contains Cd of the HP drivers provided with your printer HP 6940. It must be called ?hppp?.

Select ?Autorun.inf? > Open > OK

Select in the list the ?HP Deskjet 6940 series? driver > Next > End

(The system copies the driver files required)

At the end, Click on ?closing?.

Here is, the installation of the pilot is to finish. It was not so hard, not?
This technique (if one can call that a technique) must normally function for any printer driver.

by kferraro1

The directions you gave were perfect and something I'd much rather do when using a server to share a printer rather than use a driver for another printer that may have some compatibility issues.

by winstephen

In attempting to manually set the IP address on an HP 6940 I mis-typed it and now cannot find the printer on the network. (I typed 10.3.102.35 and it should have been 10.93.102.35.) Other HPs have a small button near the cat5 jack that wipes out any static address - but not this one.
winstephen@yahoo.com

by kferraro1

I have had to do this. These directions for a cold reset are from an HP discussion page. It will set the IP back to DHCP which you can then discover from your DHCP server.

Page 30 of the user manual available from: http://h10032.www1.hp.com/ctg/Manual/c00591688.pdf

says:

Follow these steps to reset the printer to the factory default settings:
1. Verify that the printer is powered on.
2. Press and hold down the Report Page button.
3. While holding down the Report Page button, press the Cancel button three times.
4. Release the Report Page button.

Regards,
Bob Headrick, MS MVP Printing/Imaging

by gmorrow913

Just wanted to say this helped me out as well and a quick GOOGLE search brought me your solution here.

Thanks again!

by dbreece

I had the same problem. 6980xi setup with an IP address. Could not access with a proper definition from the server directly. I accessed from an XP station on the network, shared it, then I could access the shared printer. It works just fine. This workstation is always on.

by serkanoney

Hi,

Many Thanks your solution this issue was solve my problem too. But there is one think you have to consider if you choose this driver, it creates character set problem and I try the other driver to fix and I found that 990c is more suitable.

by meyh

The model number [b]HP Deskjet 6940[/b].

[b]Method 1:[/b]
You may refer to the below links and use the troubleshooters. Check if it lists and helps resolve any issues: Open the Printer troubleshooter:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&tmp_geoLoc=true&product=46798...

[b]Method 2:[/b]
You may check if you have the latest drivers installed for the device. You may refer to the below link for getting the latest drivers and check.
http://www.hpdriver.net/hp-deskjet-6940-driver/

Good Luck.

by partizani

The model number HP Deskjet 6940.
Hi I can used this sahre and worked. succesfull
Method 1:
You may refer to the below links and use the troubleshooters. Check if it lists and helps resolve any issues: Open the Printer troubleshooter:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&tmp_geoLoc=true&product=46798...

Method 2:
You may check if you have the latest drivers installed for the device. You may refer to the below link for getting the latest drivers and check.
http://www.driverhp.net/printer/hp-deskjet-6940-drivers.html

Good Luck.

This discussion is closed to new replies.