Discussion Locked

Windows Vista Tips , Tricks & Tweaks

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

TWEAK 1 : Add "Open with Notepad" to right-click context menu

Do you use notepad very frequently to open all types of text files? This quick tweak will add "Open with Notepad" to all of your file context menus. Whenever you right click on a file, you will have the option to open it in Notepad.

Copy and paste the code below into Notepad. Then save it as a .reg file and import it by clicking on it.
Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOT\*\shell\Open with Notepad]
@=""

[HKEY_CLASSES_ROOT\*\shell\Open with Notepad\command]
@="notepad.exe %1"

13 replies

by devauniversal

There is finally an easy way (easier than before) to change your Windows Vista boot screen and use any high resolution photo as your boot screen. Using a great tool written by Dan Smith it is now possible to automatically generate the replacement language MUI file that contains your boot image files. All you need is two photos at 800x600 and 1024x768 saved as 24-bit windows bitmaps. Then follow these steps:

1. Download Dan Smith's Vista Boot Logo Generator from http://www.computa.co.uk/staff/dan/?p=18

2. Install and then run from the link in the Start Menu.
3. Hit Browse for image and select both the 800x600 and 1024x768 resolution bitmap files for your boot screen.
4. Click on File and select Save Boot Screen File as and save your file.
5. Next, you will need to replace the winload.exe.mui file in c:\Windows\System32\en-us with the one you just created. Before you copy in your new file, make a backup of the original. You will need to take ownership of all files in en-us as well as give your account file permissions to replace the file as well in order to copy the new winload.exe.mui file in.
6. The last step is to enable the alternative boot screen setting as given in step 7 to 10

7. Click on the start orb and type in "MSCONFIG" in the textbox.

8. Once the System Configuration tool loads, click on the Boot tab.

9. Under Boot Options check "No GUI Boot".

10. Hit OK and reboot to see the new screen.

The next time you reboot you should see your new boot screen. If you have problems with Windows not booting properly, boot up with the Windows Vista install CD and replace the winload.exe.mui file with your backup.

by devauniversal

Would you like the change the registered owner and organization for your Windows Vista installation? Follow these steps below to make the registry changes necessary:

1. Click on the Start Button and type in regedit and hit Enter.
2. Navigate through HKEY_LOCAL_MACHINE, SOFTWARE, Microsoft, Windows NT and CurrentVersion.
3. Right click on RegisteredOwner and select Properties.
4. Enter in the new RegisteredOwner value.
5. Right click on RegisteredOrganization and select Properties.
6. Enter in the new RegisteredOrganization value.
7. Close Registry Editor.

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
RegisteredOwner
RegisteredOrganization

by devauniversal

There are two new power buttons on the Windows Vista start menu that behave differently than in previous versions of Windows. The main button, that looks like a power button actually puts your computer to sleep, not really turning it completely off. The other button locks your computer. I personally do not like putting my computer to sleep. I would rather turn it off completely to save some power and save some money on my electric bill when I am sleeping.

Follow the steps below to customize these button to work how you want them to work:

1. Click on the Start Menu and type in Power Options and hit Enter.
2. Click on Choose what power buttons do on the side menu.
3. Configure the buttons.
4. Hit Save Changes.

by devauniversal

There is no other feature that I have heard so much positive and negative feedback about than ClearType screen font smoothing. Some users think this feature is great while other complain that it makes the text blurry and hard to read. If you are one of those that do not like ClearType then this tweak is for you.

1. Open Registry Editor.
2. Navigate through HKEY_CURRENT_USER, Control Panel and Desktop.
3. Set FontSmoothingType to 1.
4. Set FontSmoothing to 1.
5. Reboot.

HKEY_CURRENT_USER\Control Panel\Desktop
FontSmoothingType = 1
Set FontSmoothing = 1

by devauniversal

Tired of pop-up tips showing up all over the interface? With group policy editor, you can easily stop them from showing up for good.

1. Start up the group policy editor by clicking on the start button and keying in gpedit.msc and pressing Enter.
2. Expand User Configuration, Administrative Templates and Start Menu and Taskbar.
3. Select Remove Balloon Tips on Start Menu items, right click on it and select Properties.
4. Select Enable and hit OK.
5. Close Group Policy Editor and you are finished.

by devauniversal

Microsoft has removed the classic Windows NT style logon screen in Windows Vista. You can no longer hit CTRL+ALT+Delete to get to a logon box where you can type in the username and password. Instead you have to enable the alternative logon screen to restore this capability.

1. Click on the Start Button, key in secpol.msc and hit Enter.
2. Navigate through Local Policies and Security Options.
3. Locate and right click on "Interactive logon: Do not display last user name" and select Properties.
4. Select Enable and hit OK.
5. close Local Security Policy editor.

Log off and you will see the new logon screen.

Tip: If you need to log into a domain sign in with "domain\username". If you want to log into a local computer account, sign in with ".\local_username".

by devauniversal

Tired of the pathetic boot screen in Windows Vista? There is a cool trick that will allow you to see what may have been a new boot screen for Windows Vista.

Enable New Boot Screen:

1. Click on the start orb and type in "MSCONFIG" in the textbox.

2. Once the System Configuration tool loads, click on the Boot tab.

3. Under Boot Options check "No GUI Boot".

4. Hit OK and reboot to see the new screen.

Enjoy!

by devauniversal

Here are two quick reg hacks for customizing the appearance of ClearType screen font smoothing:

HKEY_CURRENT_USER\Control Panel\Desktop
FontSmoothingOrientation = 1, 2 or 3
FontSmoothingGamma = Between 1000 to 2000

FontSmoothingGamma

This setting basically adjusts the brightness. The higher you go the brighter.

FontSmoothingOrientation

This setting determines the way your monitor pixels are constructed.

None = 0 (e.g. CRT Monitor)

RBG = 1 (Default and used by most LCD monitors)

BGR = 2

by devauniversal

The new Windows Security Center in Windows Vista can be just as annoying as the security centers in previous versions of Windows. I am an advanced of a computer user to know that I do not have anti-virus software installed. I don't need the Windows Security Center to remind me that all the time.

Thankfully there is a new easy way to disable the security center messages.

1. Click on the Security Center/Windows Security Alerts logo in the system tray.
2. Click Change the way Security Center alerts me.
3. Select I do not want notification messages from Security Center.

It is now that easy.

by devauniversal

f you have User Account Protection enabled and are tired of all of the prompts that you get when you try to delete a protected file then this tweak is for you!

One way to cut down on the number of prompts that you get is to disable the delete file confirmation box. If you are trying to delete a system file you are presented with first the delete confirmation box and then the UAC authorization pop-up boxes. By disabling the delete confirmation box you can get rid of one of the pop-up boxes that you are forced to click through each time.

Follow these steps to disable the Delete confirmation box:

1. Right click on your Recycle Bin on the desktop and select Properties.
2. On the bottom of the Recycle Bin Properties window, uncheck Display delete confirmation dialog.
3. Hit OK and you are finished.

Keep in mind that you will also no longer get a delete confirmation when you delete files that are not protected by UAC. That will allow you to delete a file without any confirmation at all. If you make a mistake and delete a file by accident, just restore it from the Recycle bin. After all, that is what it is for!

by devauniversal

Removing the text below an icon on your desktop has been a classic Windows tweak for years. In Windows Vista, the same old tweak works.

1. Right click on the icon and select Rename.
2. Then hold down the ALT key and type in 255 on your right keypad. If you are on a laptop turn on numlock and use the K and I keys to enter in 255. This is the code for a space.
3. Hit Enter when you are done.

If you want to remove the text from multiple icons then make sure that you do ALT + 255 a different number of times for each icon.

by devauniversal

Windows Vista has a new search bar located on the Start Panel. You can use the new search box to find items in the various folders of your Start Menu as well as run any application from it. Just type in the name of the executable and it will search your hard drive for it and run it. This is a great feature but if you have a lot of files on your computer, then be prepared for a short delay since it may have to search for a while.

If you do not want to wait that long, there is a quick way to get the old Run command back on your Start Panel.

1. Right click on your taskbar and select Properties.

2. Click on the Start Menu Tab and then select Customize.

3. Scroll through the list and check the Run Command check box.

4. Hit OK a few times and it is back.

by devauniversal

Every time I get one of those UAC prompts asking me to authorize an administrative action my LCD screen flashes when the box pops up. This is caused by the switch to the secure desktop, similar to what happens when you hit CTRL + ALT + DELETE. The only difference is that the background is a snapshot of your desktop that gives it the effect that it is just a pop up window. Although if you look carefully you will notice it is static since the clock does not change and anything else that was animated is now static. The secure desktop provides an extra level of security to UAC by making it immune to any application that may try to automate the click on the allow button bypassing the purpose of UAC.

This sounds like a great thing but it is really annoying to me. I hate that screen flicker. Rather than disable UAC, there is a better alternative. Instead, I can just disable the secure desktop switch that causes the flicker. I know this is not as secure but it is better than disabling UAC completely.

Follow the steps below to disable UAC secure desktop:

1. Click on the Start Button and key in secpol.msc and hit Enter.
2. Navigate through Local Policies and Security Options.
3. Scroll to the bottom and right click on "User Account Control: Switch to the secure desktop when prompting for elevation" and select Properties.
4. Set the option to Disabled and hit OK.

This discussion is closed to new replies.