8 replies
by akers Accepted solution
by hal 9000 Accepted solution
It's available here
Or you can perform a Rescue Install of Windows the directions are here
But if you have any Encrypted Files you are going to need to pull the HDD and read off the encryption keys before attempting to perform a reinstall of Windows or your Encrypted Data will be Junk.
Also if you ave a hardware fault this will not work so I would really suggest either the Ultimate Boot CD to test he Hardware or a Live Linux to see if your hardware is actually working. These run directly off a CD and load into Memory and [b]Do Not[/b] affect any previously installed OS on the system. You can try your local Newsagent for a Linux Mag with a Live Linux as a Cover CD or you can download or buy one from here
My first option would be Knoppix STD but if you want something lean & fast Puppy Linux will do the trick quite nicely.
Col
by kiltie Accepted solution
Try the tips I posted here:
by animatech Accepted solution
IS this the first time you are trying to boot to windows or you were able to do so before?
Did you try booting up with last known good configuration or booting in debug mode?
Which OS do you use XP,W2K?
Did you made any changes to hardware since the last successful boot?
Did you performed an update to a driver\OS?
Do you have a recover disk to use when booting with the recovery tool?
I like the idea of booting up with a Linux live CD as this can give you access to logs and will help finding what has happened.
by akers Accepted solution
by hal 9000 Accepted solution
On a Hidden Partition on the HDD. You'll have to read the destruction manual to find out how to access this if that's the case as you haven't listed a Make/Model of computer.
Col
by akers Accepted solution
by pcfreakske2000 Accepted solution
Maybe you got a virus or spyware infection.
Or your harddrive is damaged or broken.
You could try installing a new harddrive.
You need to put the new one as MASTER , just move the jumper.
The one you have now ( when you buy a new harddrive this will be the "old" one ), you need to set it to SLAVE when you install a new drive.
Because otherwise it will not work properly.
Another possibility is setting it to "AUTODETECT". This allows Windows or your BIOS to set it up automatically.
The "drastic" option is to just reinstall Windows XP again.
You can keep the existing data on your drives. Or have a good backup handy.
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending