16 replies
by aldanatech
Swap the drive with a known working one and see if it still reboots.
I had a similiar problem recently after loading a firewall.( i am sure it's a good firewall Zone Alarm but my computer first would not even start and then constantly rebooted. )
After pulling out the hard drive replacing it with another to check if the PC was ok I then put it back and it could boot again. I uninstalled Zone Alarm and it then worked fine.
Also make sure that 2 firewalls are not running ie Windows and another.
It may not be a virus causing it but a recently loaded program, or Adware.
Once you set it up as a slave run Hardware Diagnostics on the drive, Adware, make sure any Firewalls or Virus checkers do not start up
or even unistall them. Start unistalling one program at a time.
Alternatively put this hard drive into another PC to see if it boots.
hth
by aldanatech
Poster rated this answer.
Windows xp creates a repair directory in C:\WINDOWS\repair if you copy the files to their correct locations this would fix any corrupt system hive files. But to see the NTFS Partition and Data you will need to either boot to a BartPE cd-rom to replace files or slave the HD into another Xp Machine.
I have used this to repair Bench computers for customer who were about to be formated and restored as a last resort effort.
by aldanatech
Poster rated this answer.
by zlitocook
by aldanatech
Poster rated this answer.
by dmiles
The problem could be software or hardware,so you should uninstall the game software from the drive.
The pther option could be the video driver being corrupt,so update the driver
by aldanatech
Poster rated this answer.
by willcomp
Since reboot occurs in safe mode as well, I would first suspect a corrupt registry hive.
On startup options screen (F8), disable restart on error and see if you are getting an error message. In many cases, there is one but it flashes so rapidly it cannot be read (may just be a white streak on a fast PC).
Microsoft has a good article on XP registry repair (link below).
As someone mentioned above, it is simpler to use another PC when copying registry backup files from restore folder (just drag and drop). This will also work if registry backup files are bad/missing as long as there is a good system restore point.
http://support.microsoft.com/?kbid=307545
Dalton
by aldanatech
Poster rated this answer.
by mark_mdz
If it's a bad drive, in most cases it would not have an identical pattern everytime it rebooted. In other words, the computer may boot completely one minute and 3 minutes later crash, and next time it may not boot, etc. But with this it seems, as someone already mentioned, as though you have either a bad reg. group or key, or you have a corrupt .dll that starts when windows launches (could be OS related, or driver). As mentioned, turn off the reboot on error and see if you get a stop code, or a memory dump. If you can slave the drive and boot from the primary and access the drive for data only, then go to the %systemroot% directory (WINNT, WINDOWS)/minidump and open the dump file in WinDbg.exe (download from Microsoft).
If you really think it's the harddrive, then set the drive as primary and put another drive (one that you don't want) on the machine as well, and do a disc-to-disc copy in ghost. This will bring over exactly the same "image" on a known good drive and can rule out the hardware.
Good luck.
by aldanatech
Poster rated this answer.
by wlbowers
Ain't it amazing how people will tell you to unstall something when you computer will not even boot.
Boot the machine and press the F8 button repeatedly until you see the menu.
Select the option to disable reboot on error.
Now reboot. With luck you will get a bluescreen or some other error code that you can either research or post here.
Lee
by aldanatech
Poster rated this answer.
by aldanatech
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending