4 replies
by virtualoptics Accepted solution
by kenone Accepted solution
by older mycroft Accepted solution
Therefore if you want to ascertain proper 'flow' of Yellow, Magenta, Cyan (in the correct sequential order that they are printed!) you should really go with the Test Pages built into each printer's own hardware.
If you were to make a print request based on what you saw on a monitor screen, and the Gamma had been altered for user preference (or more importantly, had never been professionally adjusted for Hue) the resultant output from the printer would give a false reading of colour values.
Best to stick with what has been coded into the printer's firmware at the factory.
by older mycroft Accepted solution
[u][b]Additive Synthesis:[/u][/b]
Monitors build colours from the 0% point of the visible spectrum (on top of a black background) in shades of Blue, Green and Red.
[u][b]Subtractive Synthesis:[/u][/b]
Printers on the other hand remove colours from the 100% point of the visible spectrum (layering ink onto a white background) in shades of Yellow, Magenta and Cyan. [i]Black ink [Kohl] is added due to an aberration of light that results in the assembly of the 3 printing inks only accounting for 98.42% of the visible subtractive spectrum.[/i]
Thus, to accurately display Yellow, Magenta and Cyan you would need a monitor that was WHITE by default, and since they're not, you cannot. ;)
FYI -
A BLUE filtered negative is used to make a YELLOW printing plate.
A GREEN filtered negative is used to make a MAGENTA printing plate.
A RED filtered negative is used to make a CYAN printing plate.
Thus BLUE, GREEN and RED are photographic filters that each remove 1/3rd of visible light which is then equivalenced into YELLOW, MAGENTA and CYAN when printing. :)
This discussion is closed to new replies.
Trending Web Development posts
Sort by Trending