Discussion Locked

Windows2000 & Novell Client

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Has anyone had any trouble getting authentication to Novell on a Windows 2000 machine? I have downloaded the latest client, but it fails authentication and wants to just log in to Windows NT.

9 replies

by wcraigmiles

Check how you installed the client. If you selected IP and IPX and IPX was not already bound to the NIC, you will not connect. You never said what version of netware or how the server was connected to the network.

So let's see if you choose theIP only connection setting. When you have the login screen, enter the ip address of the novell server you are attempting to connect. Leave the rest of the settings alone.

Let me know how it goes.

If you are not using SLP and the SLP server on the client, turn off active discovery on the client machine and the use of slp scopes.

by jlm_14

Check the frame type on the ipx/spx protocol in your network configuration. Use 802.3 as your frame type. You are probably set on automatic. I have had the same situation.

by trmackay

I am not sure if this is what you are describing, but we had a similar problem as well. The workstation would boot up and bypass the Novell Client Login screen. When you tried to force the login by right clicking the N in the system tray you stillcould not get in. The solution we found was
Right Click My Computer, Click Network Tab, and then click Network ID. Just follow the defaults.

by jeckles

I had this problem as well. It would only give me the option to log on to the MS Network Client. What I ended up doing was uninstalling Microsoft's version of the NW client (control panel | Network and Dial-UP Connections) and reinstalling the Novell "brand" NetWare client (v 4.80). I think the Microsoft version of the Netware client was overriding the Novell version.

This discussion is closed to new replies.