7 replies
by joseph moore
It's probably the hub causing the slowdown.
Remember, a hub is a single collision domain, where only one machine at a time connected to the hub can communicate. So, packets slam into one another and get queued up.
Get a switch and replace the hub with it. Each port on a switch is its own collision domain, so you don't have all those problems.
Go with a small Cisco switch, IMO.
hope this helps
by davidg47
by davidg47
by monice
Try setting the LinkSpeed and Duplex manually to 100/Full on the NIC cards of the clients and the server. By default they are set to autodetect.
Let me know if this helps.
by davidg47
Poster rated this answer.
by borg7of9
by mwogaman
We have the same problem and have tried the solutions suggested - with no better results. At first I thought it was with a particular brand of worksta as we just noticed it when we installed 5 new ones several weeks ago, but now I'm hearing complaints from other that have different brand name notebooks.
We find it happens more when opening a MS Office file on the server. Other apps seem to do fine.
I'd appreciate it if you would let me know if you ever find a solution and I'll do likewise.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending