Question Locked

Wireless browsing problems

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi

I have an ongoing problem with my laptop. I use my laptop with my home wirless router/internet via landline, no problems at all

But, if i try to use it elsewhere, e.g. airport, hotel room etc, I cannot. I can view available networks, and make connections. Signal strength is often excellent. But, I cannot browse with either firefox or internet explorer

I have tried repairing connection along with lots of other stuff. Turning on and off firewalls has been tried

So, considering the fact that i appear to be connected, apart from being able to browse, i recently tried to make a Skype call, and it worked perfectly!! So, then i tried the browsers again to no avail

This is really frustrating!!! I have tried to change internet options on both browsers to have it 'automatically detects settings' and so forth.... no good

So now i am back home again and browsing as normal! It beggars belief. It annoys me because I need the connection. It is a good toshiba laptop and this is my only problem

Please help, I cant imagine this is totally uncommon.

Oh and yes, in all the places i cannot browse, I can use skype, and others around me have been successful in browsing with their laptops. So its not a connections issue per say, just cant browse.

I used an ethernet cable at the last hotel and that was fine, but this facility is not always available, certainly not in airports

Thanks in advance for your help

Jason

15 replies

by older mycroft

Does your laptop have driver software for your home ISP installed? If so, uninstall it.

Does your home wireless network have WEP / WPA security active? If so, your wireless connection may be sending a password that is NOT required when you are away from home.

Have you checked that you are connecting to an OPEN network, and not one that is SECURE?

What is the make/model of your laptop?

by healyjason

Hi Old Mycroft

I am using Eircom Broadband (Irish internet provider). Yes, I have installed driver software. But, will uninstalling that not mean I cannot use my home connection? Thus creating a new problem?

My home network does have wep/wpa security active. So, if it is a problem resulting from my computer sending a password (unnecessarily), can i not just switch off this somehow when trying to use OTHER connections (eg at airports etc)?

Yes, the networks i have been trying to connect to have been open ones and i have been able to make skype calls while connected, but just not able to browse

My laptop is a Toshiba Satellite Pro

Thanks for your help so far.

by older mycroft

My home network consists of a tower with ISP software installed (Virgin) + a laptop connecting wirelessly + an old tower connecting wirelessly.

NEITHER the laptop nor the tower have ISP software installed - they are both attaching themselves to an available wireless hotspot - my internet connection. All that is required is that they both have the WPA password installed in the appropriate box on the wireless connection box.

The hardwired tower is in effect acting as the 'gatekeeper'.

Your home network is just another wireless hotspot and THAT is how you should be setting up your laptop - just like any other hotspot you might encounter when away from home.

By installing the ISP software on the laptop, it is still connecting when you are at home, because all the components match - but when you go away from home the variables don't match.

The very fact that on the one occasion that the Hotel had a wired connection available, you managed to connect with no difficulty just reinforces my point. The wired connection was not utilizing your installed ISP software!

Use 'Add/Remove Programs' to fully uninstall your ISP software on your laptop and re-boot. Try to connect to your home wireless network without it. I'll be very surprised if you have any difficulty at all.

Also, get into the habit of right clicking on the wireless icon in the Systray. Click on 'View Available Wireless Networks' to see what's being detected. I've done just that on my laptop and, apart from my own WPA network, there are 2 x WPA routers, 3 x WEP routers and 2 x unsecured routers.

If I were to install the Virgin ISP software on my laptop, I seriously doubt if it would detect ANYTHING other than the Virgin connection router.

Post back and let me know how you get on.

by nepenthe0

1) Check your laptop power management. Is there a timeout for the wireless adapter? If so, configure your power management so that the wireless LAN is always enabled and powered.

2) Disable the Windows Wireless Zero Configuration (WZC) service:

Control Panel > Administrative Tools > Services > Wireless Zero Configuration [right click > Properties > Disabled].

The WZC service does you a [i]disservice[/i] as it reconnects to signals of comparable strength:

"If you're near several hotspots and the connections are weak, your connection will [i]stutter[/i] and jump; when one connection fades out, XP will automatically connect you to another one, and that one will stutter, and XP will jump to another connection, and so on. The upshot is that you're never connected to any one of them long enough to maintain a useful Internet connection."

"Stuttering is caused by the very thing that allows you to easily connect to hotspots, XP's Windows Zero Configuration (WZC) applet, which runs automatically on startup. When running, WZC looks for a new network connection every three minutes, and if, at the point it's looking for a connection, your current connection fades out, it will search for a new one, and then automatically connect to it. The result is stuttering, jumping, and general uselessness."

Preston Gralla, [i]Windows XP Hacks[/i] (O'Reilly, 2005), Hack #71 (pp. 324-25)

3) Consider the Linksys USB wireless adapter:

http://tinyurl.com/3vs8r7

The Linksys software is excellent and works seamlessly.

Rick/Portland, OR

by older mycroft

Wireless Zero Configuration is required by default if you want XP to interface with the 802.xx protocol.

No WZC = NO WIRELESS, unless a third-party application is installed and takes its place.

'Stuttering' if you'll pardon my expression - has sod all to do with it.

I hate to tell you this Rick, but your much regaled Linksys does exactly the same as WZC, just under a different flag. ;)

by healyjason

So there is not point in trying this WZC rememdy then im guessing?

by nepenthe0

I assumed that [i]healyjason[/i] had alternative wireless LAN drivers/software. Obviously one needs an adapter driver, but the WZC [i]service[/i] has a decidedly unfavorable review by experts such as Preston Gralla.

That said, I stand by my Linksys wireless adapter, which has served me extremely well the past 18 months. Wherever my wife and I travel, I have not encountered [i]stuttering[/i] so long as the signal strength is adequate.

Rick/Portland, OR

P.S. - My Sony notebook has an Intel wireless chip. One can use the proprietary Intel driver or the Windows driver. With WZC disabled, the chip works better under the Intel driver. But the USB Linksys adapter outperforms the Intel wireless chip...

by older mycroft

Badly designed or badly aligned (or both) wireless aerials within the laptop screen casing.

Without knowing the exact make/model I could not say more.

by healyjason

I am fairly certain it is not a harware issue due to being able to use skype at the exact same time as not being able to browse. Signal strength is almost always shown as excellent

by healyjason

Hi Rick

Thanks for you suggestions. Here are responses:

1) I checked the power management settings and this does not appear to be the problem

2)considering what Old Mycroft said and your subsequent response, im guessing this one is not worth trying?

3) I am fairly certain its not a hardware problem, given the fact that i never have issues with my home network in this regard (detecting network, connecting, signal strength etc). It is a Toshiba laptop so i suppose the hardware should not be so bad anyway

It is not a connectivity issue per say, as I have been able to connect to the networks in various locations (airports etc).. but i cannot browse the internet with Firefox or IE. I have been able to use skype on the SAME connections though and the signal strength is almost always shown as excellent. And other people in the same locations have been able to browse at the same time without issues

Thanks for your help so far

by nepenthe0

The recommendation for disabling WZC came from Preston Gralla, [i]Windows XP Hacks[/i] (O'Reilly Publishing, 2005).

All recommendations for OS tweaks need to be filtered by common sense and by your own individual requirements.

I found many useful suggestions from Gralla's book, and there were many that I was reluctant to try. The nice thing about the WZC issue is that you can disable the service, and if you find this isn't the cause of your problem, you can simply re-enable it. No harm is done.

Rick/Portland, OR

by healyjason

I am fairly sure it is not a hardware issue as I can use the same laptop at home without any issues at all

It is a Toshiba laptop. Satellite Pro

by older mycroft

[i](This is a repost of my post above, in case it gets lost in the thread.)[/i]

My home network consists of a tower with ISP software installed (Virgin) + a laptop connecting wirelessly + an old tower connecting wirelessly.

NEITHER the laptop nor the tower have ISP software installed - they are both attaching themselves to an available wireless hotspot - my internet connection. All that is required is that they both have the WPA password installed in the appropriate box on the wireless connection box.

The hardwired tower is in effect acting as the 'gatekeeper'.

Your home network is just another wireless hotspot and THAT is how you should be setting up your laptop - just like any other hotspot you might encounter when away from home.

By installing the ISP software on the laptop, it is still connecting when you are at home, because all the components match - but when you go away from home the variables don't match.

The very fact that on the one occasion that the Hotel had a wired connection available, you managed to connect with no difficulty just reinforces my point. The wired connection was not utilizing your installed ISP software!

Use 'Add/Remove Programs' to fully uninstall your ISP software on your laptop and re-boot. Try to connect to your home wireless network without it. I'll be very surprised if you have any difficulty at all.

Also, get into the habit of right clicking on the wireless icon in the Systray. Click on 'View Available Wireless Networks' to see what's being detected. I've done just that on my laptop and, apart from my own WPA network, there are 2 x WPA routers, 3 x WEP routers and 2 x unsecured routers.

If I were to install the Virgin ISP software on my laptop, I seriously doubt if it would detect ANYTHING other than the Virgin connection router.

As an afterthought from the post above, have you by any chance invoked an 'offline' status within your Browsers? Check IE & Firefox just in case they are set to 'Work Offline'.

Post back and let me know how you get on.

by healyjason

Hi guys

I tried to uninstall the ISP settings using add/remove programs but could not see it on the list

Then i checked in the start menu and programme files folder but could not find anything

So I decided to mess with things myself in hope....

So i went into the 'Wireless Network Connection Properties' and selected 'Internet Protocol (TCP/IP)'. When selected I clicked 'Properties'

Then on the 'General' tab I selected 'Obtain DNS server address automatically'. Voila! Solved. No reboot necessary in my case. Had all browsers closed at time though

I have not tried to use the laptop at home since doing this, but can connect to 'open' networks now as I wanted, as normal

I may not be able to connect to the home network with settings as they are, but I do have knowledge of the DNS server address for my home connection and will just re-input it in the exact same place (if I cannot connect as things are) and i am almost certain this will sort the issue out

So, yes it was an issue relating to installed ISP settings, and this was how I solved it

It was the advice from you guys that helped, so thank you

I must say though that there must be another way, e.g. setting up TWO separate connections, one for auto-detecting DNS address (as I am now), and one for using a pre-typed(as I was, and probably will need to when i return home again)

Thanks for the help

Not sure if this is the best solution... but it works

If I have further difficulties, i will post them here, otherwise you can assume the solution is to leave things as they are (now having my settings to auto detect DNS) or simply re-enter the DNS address...either way, not too much hassle

Happy days
Jason

This discussion is closed to new replies.