8 replies
by johnkenn777 Accepted solution
by mjd420nova Accepted solution
by johnkenn777 Accepted solution
Thank for your reply.
My dilemna is the only Wi-Fi mini-PCI card I could find that would work in the Inspiron 1200 is the MSI MP54G4 RT2560F Wireless-G Notebook Mini-PCI Card. It requires that the laptop have an internal antenna.
Thank you for all your help.
To your knowledge are all Inspiron 1200s supposed to have an internal antenna? I read that one of the cons is no internal wireless capability, but manufacturers like MSI have made the cards now.
by oh smeg Accepted solution
If you have the Hardware and software correctly installed do you have a working WiFi Access Point where the NB is. This needs to be on the 802.11 Protocol and you need to switch the Card on with a combination of the Switch on the side of the NB and if you have Bluetooth the Keyboard Keys which can toggle between WiFi & Bluetooth.
As for a Aerial this should be a white wire with a gold clip on its end on the Inspiron 1200 as per the Owners Manual displayed here under Installing the PCI Mini Card.
This clip slides onto the PCI Mini Card and locks in place about half way down the clip. The bit that it clips to is a round looking pin with a Shoulder on it. You slide the Clip down the Pin till it locks in place you do not push it onto the Pin as this will not connect properly.
If you have a more modern PCI Mini Card the Aerial can be etched onto the Circuit Board as a trace around the outer edge of the Printed Circuit Board but if it has the option to fit the NB Aerial to use the Aerial as it will allow better reception. The aerial lead should be held down with some sticky Gaffer Tape under where the WiFi card screws in. If there is one fitted to this NB, you may be required to unscrew the WiFi Card to gain access tot he Aerial Lead.
Col
by johnkenn777 Accepted solution
Thank you for the quick reply. It is crazy how difficult it seems to network a laptop wirelessly. I have an old Biostar board MKVD in my pc and I have no problems connecting it wirelessly to my Belkin Wireless G Router. What is the purpose of having a mini-PCI card slot in a laptop if you can't use it.
Here are the router and MSI mini-PCI card names:
MSI MP54G4 RT2560F Wireless-G Notebook Mini-PCI Card
Belkin Wireless G Router- 2.4GHZ 802.11g
Model F5D7230-4
The laptop is Inspiron 1200
Service Tag: 83Q6061
I thought the Service Tag would tell you the build of the laptop. It just shows a bunch of parts.
Thank you for all your help.
by oh smeg Accepted solution
With a PC it is very unlikely to be moved around so it doesn't require the same level of Security to prevent Intrusion that a Mobile Device that can be connected to many different WiFi Systems does. It also is only connected to the 1 WiFi Access point so there is no need to build up a Data Base of User Profiles to use the different Access Points.
This is your PCI Mini Card
http://www.msicomputer.com/product/p_spec.asp?model=MP54G4&class=com
The problem here is if this card was not supplied by the NB maker it may not be compatible with the NB that you are attempting to fit it to. As the Genuine Product is more expensive than the After Market offerings many attempt to use the After Market Products and they just are not compatible with the hardware that is it fitted to. In the case of WiFi Aerials the Maker will reserve the right to incorporate Design Changes as they see fit so with a newly developed or supplied WiFi Card they may no longer need a Aerial in the NB but a after market WiFi Card that is stated to work with this model NB will not have a Aerial built in and requires the one that was in a older version of that Model NB so you have an immediate problem arise here.
As far as Dell's Service Tag's go they show the exact components inside the unit that was supplied so you have the correct hardware configuration for that Particular NB. Dell do this by listing the Parts used to make the NB when it comes to identifying the actual NB and with the service Tag you will only be forwarded tot he actual Drivers that the item uses not the complete Drivers for that Model of system. The use of Service Tags refines the search to the exact hardware used to make the NB.
Col
by bens Accepted solution
When you inserted the Mini-PCI, you should have seen two wires (one primary, one secondary) taped next to where the Mini-PCI wireless card would normally go. These antenna cables normally run up and under the keyboard then around the LCD. It is possible that they are tucked uder the keyboard if they weren't taped down.
Is Device Manager picking up the wireless card? Do you have your wireless switch on (either by a physical switch or a 'FN' + hotkey)?
If all else fails, save yourself some time/headache and go with a wireless PCMCIA card which would have a built-in antenna. Sticks out the side some, but easier to install if you can't find the antenna wires anywhere. Just a thought.
by cfrobw Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending