Discussion Locked

Wireless Networks

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

A client has a small office in thier home but spanning over 3 rooms and 2 floors. We are thinking of networking it using wireless as they don't want wires running in the home and we don't like the thought of climbing and drill into brick to run it outside.A DSL line will then be attached to the whole network.

Does anyone have experience with wireless and know what the issues are we should be looking at. Any experience with specific vendors?

Thanks

Lynda

5 replies

by john22

I had a situation similar to yours, but using a cable modem. Used Linksys products. The router (Model # BEFSR41) can handle either cable or DSL, there are two versions, single port (don't know model #) and the model noted that is also a 4 port router w/ firewall. The wireless access point (Model # WAP11) is stackable with the router. Also need the PCI adapter (Model # WDT11) and the PC card (Model # WPC11). The PC card works great with laptops, but for a desktop you must have both the PC card and PCI adapter for each computer. The specs aren't clear on that point. One other thing, I found that the PCI adapter will not work on Compaq computers, you must use a Compaq PCI adapter. If the network is small and the PC's are fairly new, itwill run at about 11MBps, also gives you options for WEP and roaming. You can go to www.linksys.com for more specs. I believe Compaq has their own wireless solution, but have not used it. Let me warn you however, the order backlog is huge, it took 6 weeks to get the Access Point. Feel free to e-mail me with any questions. Good luck!

by john22

I had a situation similar to yours, but using a cable modem. Used Linksys products. The router (Model # BEFSR41) can handle either cable or DSL, there are two versions, single port (don't know model #) and the model noted that is also a 4 port router w/ firewall. The wireless access point (Model # WAP11) is stackable with the router. Also need the PCI adapter (Model # WDT11) and the PC card (Model # WPC11). The PC card works great with laptops, but for a desktop you must have both the PC card and PCI adapter for each computer. The specs aren't clear on that point. One other thing, I found that the PCI adapter will not work on Compaq computers, you must use a Compaq PCI adapter. If the network is small and the PC's are fairly new, itwill run at about 11MBps, also gives you options for WEP and roaming. You can go to www.linksys.com for more specs. I believe Compaq has their own wireless solution, but have not used it. Let me warn you however, the order backlog is huge, it took 6 weeks to get the Access Point. Feel free to e-mail me with any questions. Good luck!

This discussion is closed to new replies.