Discussion Locked

XP has froze-up

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Dell Optiplex GX280, when booting up the system it exec the Bios it went through fine. When it openning XP windows it seen to process through, the windows XP logo appear and disappear, but when the screen turn blue it hangs. Try to load with "last known configuration, and still it's a NOGO. What else can be done?

11 replies

by xt john

Sounds like you getting the infamous BSOD (Blue Screen Of Death). At that blue screen is cryptic information about what is causing windows to crash. Did you try starting the PC in safe Mode? This will usually indicate an improper driver for an item sucha s a video card. Have you changed any hardware recently? such as a video card? I've seen modems that were damaged by a power surge do this, until the modem was isolated to be the problem and replaced. Write down the information from the BSOD (the numbers listed after the Stop:) and do a Google search to narrow down what may be causing the crash.

by w2ktechman

A service or device is unreachable. It can hang for 1 minute for each. How long did you wait before rebooting?
Try unplugging all external devices (except keyboard, monitor, mouse) and see if it boots up better.
If it does not, it may be a failing HDD (not reading properly) or corrupt files. You can try inserting the XP disk, and running a repair.

by hal 9000

I had a similar problem on one of my workstations the unit would POST and then start the Windows Splash Screen and then reboot.

The problem here turned out to be a bad IDE Controller on the M'Board.

But before you throw away a M'Board download the HDD Makers Drive Testing Utility and test the drive to see if it's still working correctly. If that passes then you need a copy of the Ultimate Boot Cd and do some Diagnostic Testing on the computer. You can get a copy from

http://tinyurl.com/3jnpy

Col

by kimo99

re-install hal.* At least that is what I had to do when my system crashed. I think it's a DLL. What it does, I don't know but pretty close to the kernel I think.

by paul

I bet you have automatic updates enabled and WIndows has updated your video card drivers. Boot in safe mode and roll back the video driver and I am 99% sure it will work again. Don't let Windows decide what to update next time.

by dlloyd

if on broadband using the ethernet connecion, disconet ethernet cord, reboot and reload adsl driver then try again, noticed this when it happened to me did the above and it wored ok

by 0 badmonkey 0

The Dell diagnostic disk that come with the 280 is a really great tools for figuring out this type of thing. Run the complete diagnostics. It should give you an idea of where to start.

I have worked on Dells since the precision 420 workstations for an agency, covering 400+ stations. The diagnostics disks work well for basic analysis.

by deltafive

Computer rebooting before the OS actually finishes loading is likely to be the result of either a bad RAM chip, or your OS is has a corrupt registry.
You can try first to boot your computer with F8, and choose to allow the computer to start without rebooting at system error. This will generally allow the BSOD to stay on the screen. I've had this with two machines in the past month (both XP Home). The BSOD showed registry error. If this is the case: sounds to me like you will have to reformat your drive, and re-install the OS, that's saying you have the restore disks yet from your Dell computer, or an original copy of XP. Connect your drive to another computer, directly or through an external drive enclosure. Backup your documents, email information, and whatever other files you deem necessary. Reformat, and re-install.

This discussion is closed to new replies.