Discussion Locked

XP overlay not completing

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

attempted to overlay fresh copy of XP Pro on P4 machine with 1GB memory and 60 GB HDD. Install stalled looking for "asms" file on XP disc. When I attempt to ignore and continue, there is a fatal eror message "that prevents setup from coninuing. One of the component windows needs could not be installed. Secondary error message,"c:\windows\system32\drivers\uninst2k.exe was not copied to c:\program^1\sis7012\uninst\uninst2k.exe because the user chose to skip the file operation. Now I cannot start windows, it wants to complete the installation and I get the same error messages. What can I do
to complete the install (to replace files) or get back to windows? I have told it to boot from the IDE 0 first.

3 replies

by dmiles

Use a Microsoft Windows 98 Second Edition or Microsoft Windows Millennium Edition (Me) Startup disk with CD-ROM drivers to restart the computer.
2. Copy the Xcopy.exe tool from the Windows 98 Second Edition CD-ROM, the Windows Millennium Edition (Me) CD-ROM, or the hard disk to the Windows Startup disk. To do this, use the appropriate method.
Windows 98 Second Edition CD-ROM
Insert the Windows 98 Second Edition CD-ROM in the CD-ROM or DVD-ROM drive, and then at the command prompt type the following lines, pressing ENTER after you type each line, where cd-rom is the drive letter of the CD-ROM or DVD-ROM drive:
a:
copy cd-rom:\win98\smartdrv.exe
copy cd-rom:\tools\oldmsdos\xcopy*.*
Windows Millennium Edition (Me) CD-ROM
Insert the Windows Millennium Edition (Me) CD-ROM in the CD-ROM or DVD-ROM drive, at the command prompt type the following lines where cd-rom is the drive letter of the CD-ROM or DVD-ROM drive, and then press ENTER after you type each line:
a:
copy cd-rom:\win9x\smartdrv.exe
extract cd-rom:\win9x\win_17.cab xcopy.exe /L a:\ xcopy.exe
extract cd-rom:\win9x\win_17.cab xcopy32.exe /L a:\ xcopy32.exe
extract cd-rom:\win9x\win_19.cab xcopy32.mod /L a:\ xcopy32.mod
Hard disk
At the command prompt, type the following lines where drive is the drive letter of the hard disk where Windows is installed, and then press ENTER after you type each line:
a:
copy drive:\windows\smartdrv.*
copy drive:\windows\xcopy*.*
3. Eject the Windows 98 or Windows Millennium Edition (Me) CD-ROM, and then insert the Windows XP Professional CD-ROM.
4. Copy the I386 folder and all its subfolders to the hard disk. To do this, type the following lines at the command prompt where cd-rom is the drive letter of the CD-ROM drive, and drive is the drive letter of the hard disk, and then press ENTER after you type each line:
smartdrv
xcopy cd-rom:\i386 drive:\i386 /e

This discussion is closed to new replies.