Question Locked

XP Pro boot-up to desktop too slow.

0 helpful
19 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I was having problems that I could not figure out with my computer, so I did a clean install of XP Pro. I also installed SP2 and SP3, and all subsequent updates. Now, it takes an unusually long time to boot to the desktop, especially the "loading personal settings" part. There is not much on the computer yet since I just reinstalled Windows, and I have ran several malware scans. Does anyone know what may be causing this?

19 replies

by brian

Have you checked/tested your RAM in the system? If not, I would recommend downloading MEMTEST86+ and booting it from floppy (you can also download the Ultimate Boot CD and run it from there). Make sure that you have a minimum of 512mb ram. Also, there is a known bug (atleast to compaq and HP) about SP3 and AMD processors not running correctly. Microsoft has not released an update to fix that bug to my knowledge, but HP made their own. The bug for AMD and SP3 affected me, but when I installed SP3, my system would not even go past loading personal settings (I had an old AMD 2600 Athlon XP). Let me know if this helps you out or points you in the right direction.

by flyingfortress

I just performed a reformat/reinstall. This install is much faster. Thanks.

by flyingfortress

After installing SP2, SP3, and all updates, it is back to booting up slow again. I am guessing that my system is too old. At least it is quick once booted up.

by oh smeg

Have messed up something along the way as well. If you look at the contents of the HDD you'll find at least 2 files with a long Alpha Numeric String that can not be removed. There will also be numerous changes made from the initial install after applying SP2 & 3 that could be slowing things down or even introducing errors into the Boot Process that take time to work through.

Instead of installing your copy of XP then adding SP2 & 3 try using nLite

http://www.nliteos.com/download.html

To incorporate SP2 & 3 into your Custom Made Slipstreamed Install Disc. You can add both SP's and any specialized drivers and Patches so that it is a 1 Step Process installing Windows. Just be sure to read the directions on their Web Site here

http://www.nliteos.com/guides.html

Col ;)

by flyingfortress

Funny thing, I have one of those long-named files on my slave drive (D drive) instead of where Windows is installed (C drive). I'm not sure what it is either, but it is a little over 6 MB. It has an amd64 and an i386 folder within.

I installed XP Pro, then SP2, and then SP3. Then, I installed any remaining updates. I did not install any updates in-between SP's.

by oh smeg

And depending on the hardware it is installed on can go on any HDD or maybe every HDD/Partition. The AMD64 is to address an Issue with some AMD CPU's which wouldn't allow the SP3 to install correctly and the system would roll back to SP2 and give a message that it may no longer be stable. I've also seen the same result with one model of Acer NB that had Intel CPU's and they where about as helpful as Breasts on a Bull. The most useful thing that they could say was that SP3 was still bets 3 weeks after it was released to the Windows Update Servers. I think that they where hoping that if they kept their heads in the sand long enough the problem would just go away which of course it wouldn't. ;)

On the system that I assembled this week I only have [i]68e4f4793f2eacb4dd[/i] on the C Drive but then again I only had the C Drive connected when I applied the Slipstreamed Install Disc which included SP3 I think. This is because the C Drive is a Mirrored RAID Array so I didn't want to run the risk of getting the wrong drives included in the RAID. But it is a i7 CPU and 4 Gig's or RAM which is all that a 32 Bit version will support and it still takes several minutes to Boot to a usable Desktop but after that it flys along. It replaced a 2.5 P4 and there is very little difference between the Boot Times though the old unit took over 24 hours to run a complete Virus Scan where as this system now only takes 9 hours 53 minutes to do the same thing so it is considerably faster. ;)

Col

by flyingfortress

I have my main C drive and a slave D drive that is empty. The file,938ef12bd08fea29fdfdc157, on my D drive is the only thing on it. Before I reformatted/reinstalled, these files used to be on my main drive only. Why is it on a slave drive. Can I move it to my C drive? Is it from SP3? Should I just leave it alone?

by oh smeg

Though if you have nothing at all on the Slave Drive it may pay you to move your Page File there to speed up the Drive Access Times.

That file is installed by the Service Pack or more correctly when you start to install the SP it decompresses is written to a Unmovable File on one or more HDD's/Partitions and is actually run from there as it installs. The i386 File may be used when you install any additional Hardware like USB Thumb Drives and holds a lot of Generic Drivers which may not be present in it's namesake that was installed when Windows was initially loaded. ;)

Col

by flyingfortress

Not quite sure what you are exactly talking about. Could you explain or provide a link for more info? Thanks.

by akbar_meerakbarali

Hi
system will boot slow coz of operating files are corrupted or damaged try to repair operating system it will solve your problem

Regards
Meer Akbar Ali

by flyingfortress

I reformatted/reinstalled XP Pro twice within the past two weeks - same problem. Everything boots up fast, until I install SP2 & SP3, plus updates. Then, it is slow.

by oh smeg

I would include the SP3 and make a Slipstreamed Install Disc and see if that helps.

But the more you add to any computer in the way of drivers/programs the slower the Boot Process will be as it has to load more.

Open the Device Manager click on the Performance Tab and see how many processes are running. If you remove any unnecessary items there. The less that you have load on Boot Up the faster the unit will boot and run commands.

Col

by 93961

Did anyone ask him his system configuration before diagnozing the problem? This may be the problem?

by flyingfortress

Windows XP Pro SP3
MSI (MS-6777) Motherboard
AMD 1.1 GHz Processor
ATI Radeon X1600 Pro Video Card
40 GB Main Drive
30 GB Slave Drive
3.5" Floppy Drive
DVD Drive
CD-R/RW Drive
1 GB RAM

What else do you need to know?

by oh smeg

But over all as this is slow by todays standards it just may be the way that this is going to work.

What you should do is to make sure that the M'Board is correctly configured for best performance so Max out the RAM but read what MSI's Web Site has to say about the type of RAM.

[i]Main Memory
? Supports four memory banks using three 184-pin DDR DIMMs
? Supports up to 2GB PC3200/2700/2100/1600 DDR SDRAMs
? Supports both 64-bit and 128-bit DDR SDRAM
Due to the High Performance Memory design, motherboards or system configurations may or may not operate smoothly at the JEDEC (Joint Electron Device Engineering Council) standard settings (BIOS Default on the motherboard) such as DDR voltage, memory speeds and memory timing. Please confirm and adjust your memory setting in the BIOS accordingly for better system stability.
Example: Kingston HyperX DDR500 PC4000 operates at 2.65V, 3-4-4-8, CL=3.
For more information about specification of high performance memory modules, please check with your Memory Manufactures for more details.[/i]

It's just best to use the same RAM to prevent Timing Issues as well.

Col

by flyingfortress

Folks, I'm almost too embarrassed to say this, but my slow computer was self-induced it seems. I am running Super Anti-Spyware Pro on my computer, and I had a box checked in the settings of that program that enabled "First Chance Prevention", which performed a spyware scan on every start-up and shut-down sequence. Once I unchecked that box, things are much faster. Thanks for all your help.

This discussion is closed to new replies.