Question Locked
0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a network of 30 hp DC dx2300 PC's IP add DHCP assigned; 1xhp DL380 5150 server with SBS2003 (Domain Controller, DNS &DHCP); 1xhp DL380 5120 server running an application that runs on SQL2005 & MS 2003 Server. All the Computers periodically lose connectivity to the servers until i do a repair on the network connection or restart. They do not all lose connection at the same time. I have changed the NICs used initially being used on the servers but still the problem persists.
3 replies
by rngara Accepted solution
Clarifications
by Former member Accepted solution
Right click on "Local area connection" and select "properties > configure" and the select "power management", in here there is a box that says "Allow the computer to turn off this device to save power" Un-tick it.
The computers in question should now keep the connections. If not then it might be in the power management on the server.
Please post back if you have any more problems or questions.
by rngara Accepted solution
Thank you Peconet for your response, but i am still experiencing the same problem, even after doing what you suggested.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Locked
Internet connection perfect on PC, not connecting anywhere else
0 helpful
4 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies