Discussion Locked

Your thoughts count as I backup data

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
This is a small environment with 3 computers Win98, Win2000 and WinXP all need to be backed up. One computer will do the work. I am looing for suggestion to get this job done. Software and hardware suggestion. What is the best way to ge this jobdone? What are some of this things you guys are doing? Time for me to do my research?

3 replies

by thechas

What size is your file set for backup?

Can you back up ALL data files from 1 PC, or do you need a portable drive?

If your backup file set is small (less than 2GB per PC, you can consider CD-R disks.

You will need back-up software that supports CD-R drives.

A few links are:

http://www.willowsoft.com/backup/

http://www2.educ.umu.se/~cobian/prog.htm

http://www.lexunfreeware.com/

http://www.ntius.com/

http://www.backup4all.com/index.html

For larger data sets, you will want a tape drive.

Make sure that you get a relatively recent drive so that the tapes used will be a 'stock' item as long as possible.

Next, I unless it is impractical, I recommend weekly full backups and daily incremental backups.
Use 2 or 3 large capacity tapes for the weekly, and 2 or 3 sets of smaller tapes for the incremental backups.

Rotate the tapes in sequence.

DO NOT use CD-RW disks for anything beyond daily backups. The risk of data loss is too high.

Chas

by csmith

We have customers that back up using CDR and removable hard drives, which are cheaper, but when it comes to ease of restoring and reliability, it's tape.
The majority still use tape backup, for these reasons.
Backing up over your network is fine.I assume the Win2K PC is the "server".
Install the backup device in it.
Use Win2K as the OS for the backups; it works best most of the time.
(There are exceptions, where Win98SE has to be used, because Win2K does not recognise the device.)
IDE is fine for small shops. (Seagate/Travan)
This is not a difficult job, and most installs are sucessful first time out.
Make sure you test the recovery, and make sure you have an off site storage place, so when the room burns, the backups are not destroyed also. (Seen that problem already.)
Regards, Chris

by wlbowers

I back up to a hard drive. It's in a removal tray. By using Partition Magic or Drive Image, you can make an exact copy of your working drive. It is possible to boot directly off the copy.

Some people like to use ghost. I haven't had a lot of good luck with ghost.

They have one touch external drives now.

This is segate's version: http://tinyurl.com/5bvak

There are others in the market.

Some intersting combinations are avaible.

http://tinyurl.com/6egre

You could do an external drive enclosure that would be connected when the backup is needed.

Go with firewire if you do this option.
Stay away from usb 1.0 no matter what the price. You will grow old and die before you copy large amounts of data at 12mb.

USB 2.0 is better but because of the data structure, firewire still wins.

You could use DVD or CD. The problem with this is time.

Good Luck Lee

This discussion is closed to new replies.