Discussion Locked

386enh in system.ini

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

where can i find tutorial or list of everything can
be added in 386enh section of system.ini?

when i set buffer for ex. irq15=1024 in above section is that in kb or bytes.

5 replies

by jmatt

This is all I can help you with , but it is kb .

Sys.ini , MinSP's from 4 to 12
http://support.microsoft.com/support/kb/articles/q149/0/83.asp
http://www.windows-help.net/windows98/troub-461.shtml

"There Are No Spare Stack Pages" Error
If you get an error:

There are no spare stack pages. It may be necessary to increase the
setting of 'MinSPs' in System.ini to prevent possible stack faults.
There are currently (number) SPs allocated.

To resolve this for W95 , add the following line to the [386Enh]
section of the System.ini file and then restart your computer:

MinSPs=12 ( example )

For W98 .
You can do this by selecting Start > Run, and type msconfig in the
Open: box. Press OK. Select the System.ini tab,scroll down to, and
select the [386Enh] section. Press New and type the command MinSPs=12,
press Apply, and follow the prompts.

If the problem persists, increase the number of spare stack pages in
increments of 4 (for example 12, 16).

Note: Each spare stack page requires 4KB of memory .

by saihib

Check out Microsoft Knowledge Base articles Q83435 and Q83436. These articles give you an A to Z listing of entries for the 386enh section of system.ini

This discussion is closed to new replies.