Discussion Locked

4 PCs all XP cannot all see each other?

0 helpful
24 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I have a small network. 4 computers(3 desktop, 1 laptop)I will call the computers a b and c. the laptop will be d. All are connected via CAT5 to a Linksys router. Router is connected to a cable Internet connection. All computers can browse Internet. All are using dynamic IP addressing. All have XP firewall turned off! All have Norton with firewall turned off! Computers A and D are XP pro. Computers B and C are XP home. All have file and print sharing installed. Now here is the problem. Computer A see computers B,C, and D. Computer B see Computer A & C only. Computer C see A & D, but not B. Computer D sees A & C only, but not B. Bottom line is I need A,C, and D to see Computer B because they is a common folder on that computer that all the other computers need to access on a daily basis.

Thank you for any help.

24 replies

by gary56789

Try uninstalling networking on computers B,C,and D. Then run the Network Setup Wizard on computer A (making the floppy disk to install networking on the other computers). If the laptop has no floppy drive, burn to CD. Then run the floppy (CD) on computers B, C, and D.

If you still have trouble, repost.

by millhouselives

ctrservices thank you for your response, but your method would have involved a lot of extra work that clinet would not be expected to pay for.

by bobsta

Setup users on all PC's, go to control panel user accounts and change to users must press CTRL+ALT+DEL to logon. Give access to all users created to Share folder.

by noggin_the_nerd

silly questions probably -
all are in the same group?
the folder on B is shared?
why not have xp pro on all? - think small upgrade charge if u do that

Some differences between Pro and Home are networking; domain membership/group policy - this could be cause of probs. 'Fraid I have never used Home so can't elaborate - just have read some techie group discussion on it in past.

Alternative solution - As all can see A, and presumably not important for the rest to see each other, why not put shared folder on there?!

by millhouselives

Noggin the nerd, thank you for your answer, folder on b is shared, owner does not want to spend money to upgrade this time. shared folder needs to stay on computer B for business reasons.

by saihib

You need to set up user accounts for users A,C and D on computer B and share the folder on B.

by benwater83

I think you need to renseign the Hosts file in c:\windows\system32\drivers\etc\hosts , you can open this file with notpad it looks like this :
127.0.0.1 localhost

and you just and the ip adress and name of each other computer...

by cmb from omaha

I had a similar problem networking an XP Home laptop and XP Media Center desktop. Trying to view workgroup computers via My Network Places just doesn't work, even after doing all the recommended tweaks. HOWEVER, my PCs do "see" each other at some level--I can access my shared folders on the "other" PC by using the distant PC's IP address. (Run ipconfig from command line to view each PC's IP address). Hope that helps!

by cmb from omaha

For example, my coworker's computer (computer's name: Peaches) has a shared folder called "Everybody's Documents". The IP address of Peaches is 10.3.100.120. If for some reason I couldn't access "Peaches" via my "Network Places", I can still go to Windows Explorer and enter:

\\10.3.100.120\Everybody's Documents

This is obviously less convenient to remember than "Peaches", but it lets me access the resources I need. Good luck!

by millhouselives

Thank you CMB, but this would be more work and learning for the users and knowing these users it would be a nightmare to support. thank you for trying. Poster rated this answer.

by millhouselives

Thank you all for your quick replies! I will be visiting the site on Tuesday 11/29/05 to work on the network. I will then report back to you all and let everyone know what I find and what answer helped me fix the problem!

by itguy67

When you say Computer X is not able to 'see' Computer Y does that mean no connecivity at all? i.e. Cannot ping IP address and/or host name or that there is no connecitiy via the browse list?

by millhouselives

ITGuy67... I had no problem pinging all of the computers from each other. Problem is not seeing the shared folder on one of the computers from another. Stay tuned and I will post what I found to be the problem!

by adembo

what is their workgroup? Is it the same?

Have you made a connection of all computers at some point? If so, are they still not in My Network Places? After you make the connection, it should then remember and keep a shortcut to it there for you.

by adembo

Another note, as long as you have file and print sharing enabled, there is no need to turn off the firewall. That will have nothing to do with it, as long as the file and print sharing is enabled.

by millhouselives

thanks adembo,all in same workgroup, and yes connection has been made at one point to all computers.Stay tuned and I will post what I found to be the problem!

by millhouselives

Hi All,

Well, The problem turned out to be Norton Internet Security 2006. It had recently been download on these computers in early Nov. When I first worked on this issue, the very first thing I did was to configure the Norton firewall to accept our IP range of 192.168.1.1 thru 192.168.1.254. Then I turned off XP FW. Now all was well until we could not connect to Computer B shared folder. What I found was that even thought Norton was turned off on Computer B was that after a reboot the damm Norton firewall was turning itself back on. Soon as I turn off this firewall, all the other machines can connect and see the shared folder on it. What makes no sense is that when it is on, it is configured to allow the IP range access to it. That is how Norton is setup on all the others and access to them is Ok with no problems. So, I uninstalled and resinstalled, reconfigured Nortons and now all is working.

This discussion is closed to new replies.