Discussion Locked

98 Slows,then locks up-not emptying RAM

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Windows 98 SE: RAM fills up and everything slows down (ALL Computers). Try to do anything it takes forever. Is there a simple command to empty the unused memory occasionally. Every time I copy large programs or CD burn I have to restart my computer (Very TIME CONSUMING). I recently Installed Norton System works to try to help out, it did show me the RAM USAGE fills up but NEVER EMPTIES unless, I restart. This is Innefficiant, causes program failures, and seems like a BUG in the WINDOWS operating system (sorry Mr. Gates). It also occures if I leave the computer on with a program running, I monitor Surveillance Video and alarms remotely, so this is a problem. I have heard of a program called Catcheman but do I really have to add a program tomake Windows run properly?

7 replies

by tjc

What you seem to be describing is the memory leaks that most all programs have. System resources is the main concern of the OS when talking about programs. You see there is limited stack space (128KB x 3 set aside for the GDI, User, system resouce) avalible for programs running, example. the number of forms each program is made up, the number of command buttons (such as ok, cancel, help, etc) As you quit a program windows is to free up the resource that the program used so that the next programthat is running can have that resource, but that is not the case. What happens for reasons that I really don't understand they are not freed up completly and you will eventually run out.

to see what I'm talking about run the start/programs/accessories/system tools/system resources program to see... if it is not at that location you will need to go to control panel and load it off the windows cd.

The only good way to free up all system resources is to reboot.

by wubbavision

I probably didn't make myself clear, the Ram I spoke of is the is the 384 MB of DIMM memory I have in the computer. When this fills up and I am running only a CD recording or loading files, after I close these programs the memory usage, doesn't close-with the programs, and any other programs that I open add to the 256mb that was used by the previous program. I thank you for your answer.

by fullcircle9711

Yes he's quite right about the answer to your problem if you intend to run win9x operating systems, the only way to free up that valuable memory is to reboot. I've always thought this to be a bug in the software as well and fortunately there is something you can do about it. Install a different operating system like Windows XP(very nice), Windows 2000, or a linux based os. These will all help you avoid the problem you described; Windows XP is by far and away the best for many reasons though.

by netuser

TJC is right. Resource leak as sometimes referred to is a problem of Win 9X as in win 3.x. and the only way to free up is to exit and restart windows to re-create a new heap and start with maximum resources.

by bstayskal

There is a shareware program I use called FreeMem Pro. With just a click of the mouse, I can free up memory on the fly. It displays the amount of free memory on the task bar. When it gets low, you just tell it how much you want it to free up, andit does without causing any problems with open programs.

This discussion is closed to new replies.