Discussion Locked

98 worksta can't see shares on NT server

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an NT domain with NT servers and workstions. I recently added an Win 98 laptop to the domain but I can't see all the my shares on the NT server when using this 98 laptop. I can see most of them but 2 or 3 are not seen when I browse the NT server. When I use an NT workstation pc all is well but when I use the Win 98 one I have this problem. There are no policies on the domain and share permissions are full control for everyone on all shared folders

How can I resolve this problem for the 98 laptop?

Thanks

7 replies

by stephen.buttery1

The NT share name is probably too large for the windows 98 PC to read. I believe the maximum in is about 10 characters.

by lewey04

The first answer is right but I would like to add to the answer. TechNet article Q160843
addresses your problem specifically.

Share names that use more than 12 characters can be seen by Windows NT clients, but not by Windows 95/98 clients.

Good luck and hope this helps.

by gutridgesj

if it is not the share name being too long, i would not fret as long as you can still map the drives you want to map.

can you map a network drive from the laptop using \\server\sharename without browing?

if so, then if the share names are not too big, it is the ole ms browsing problem and as long as you can manually map resources, i would not worry about.

This discussion is closed to new replies.